Difficulty
Moderate
Steps
3
Time Required
10 minutes
Sections
1
- Onkyo R-21 Laser Cleaning
- 3 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackOnkyo R-21
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Problem can be solved by cleaning the laser lense.
What you need
Step 1
Remove plug and cover
- Remove the data cable from the amplifier by pulling during pressing the plug on both sides
- Remove the 4 crews on the sides and the 3 screws on the back to remove the cover
Remove the data cable from the amplifier by pulling during pressing the plug on both sides
Remove the 4 crews on the sides and the 3 screws on the back to remove the cover
1024
Step 2
- The laser is located under the laser protection shield
- You can move it closer by turning the white gear to get better access to clean it
The laser is located under the laser protection shield
You can move it closer by turning the white gear to get better access to clean it
Step 3
Clean the lense
- Take a microfiber cloth or any clean cloth which is lint-free
- Wrap it around a flat screwdriver and soak it with high-percentage cleaning alcohol. I used 80% alcohol and it worked fine
- Clean gently and carefully the lense
- Turn the laser back to its standard position with the gearwheel
Take a microfiber cloth or any clean cloth which is lint-free
Wrap it around a flat screwdriver and soak it with high-percentage cleaning alcohol. I used 80% alcohol and it worked fine
Clean gently and carefully the lense
Turn the laser back to its standard position with the gearwheel
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Chris Müller
Member since: 09/25/2018
367 Reputation
3 Guides authored
Badges:
4
+1 more badge