Onkyo Tx 800 Button Pins Repair Repair Guide

Difficulty

Moderate

Steps

10

Time Required

                          10 minutes            

Sections

4

• Disassembling Onkyo TX-800 Top case
• 3 steps
• Face plate
• 3 steps
• Logic board
• 2 steps
• Onkyo TX-800 Button Pins Repair
• 2 steps

Flags

1

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

• BackOnkyo TX-800

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Disassembling Onkyo TX-800 Top case               

• Remove the two screws on both sides of the receiver. Keep these and the rest of the screws in a safe place.

Remove the two screws on both sides of the receiver. Keep these and the rest of the screws in a safe place.

1024

Step 2

• Remove the top screw on the back panel.

Remove the top screw on the back panel.

Step 3

• Slide off the case to expose the internal components of the receiver.

Slide off the case to expose the internal components of the receiver.

Step 4

              Face plate               

• Unscrew the three screws on top of the face plate.

Unscrew the three screws on top of the face plate.

Step 5

• Unscrew the one screw on the bottom of the front panel.

Unscrew the one screw on the bottom of the front panel.

Step 6

• Simultaneously push down on the head of the snap on each end of the device with your thumbs and push to seperate the face plate. This may take some force.

Simultaneously push down on the head of the snap on each end of the device with your thumbs and push to seperate the face plate. This may take some force.

Step 7

              Logic board               

• On the inside middle of the face plate you will see two screws in the logic board. Unscrew these two screws.

On the inside middle of the face plate you will see two screws in the logic board. Unscrew these two screws.

Step 8

• You will see the same snaps along the top of the logic board. Press the heads of the snaps down and pull the logic board out and up.

You will see the same snaps along the top of the logic board. Press the heads of the snaps down and pull the logic board out and up.

Step 9

              Onkyo TX-800 Button Pins Repair               

• You will see that each button on the face plate has a button pin that presses the corresponding button on the logic board. Visually check if any of these pins are bent or broken.

You will see that each button on the face plate has a button pin that presses the corresponding button on the logic board. Visually check if any of these pins are bent or broken.

Step 10

• If any of the pins are bent use your pliers to bend the pins back into shape.
• Take caution that too much force can break the button pins.

If any of the pins are bent use your pliers to bend the pins back into shape.

Take caution that too much force can break the button pins.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 7 other contributors 

                    Ryan                     

Member since: 04/13/2010

108 Reputation

                                      3 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       Cal Poly, Team 27-92, Amido Spring 2010                        

                                                  Member of Cal Poly, Team 27-92, Amido Spring 2010 



                    CPSU-AMIDO-S10S27G92                     


                                            4 Members                     


                                            7 Guides authored