Oontz Angle 3 Ultra Micro Usb Port Replacement Repair Guide

Difficulty

Very difficult

Steps

6

Time Required

                          30 minutes            

Sections

2

• Back Panel
• 4 steps
• Micro USB Port
• 2 steps

Flags

1

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

• BackOontz Angle 3 ULTRA

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Panel               

• Remove the two black rubber sheaths around the edges of the speaker.
• Under the symbol-marked sheath there is a white rubber covering for the buttons. Peel this away to reveal the panel underneath.
• On two corners of its triangular face there is a small divot, which allows you to use your fingernails or a pair of tweezers to grip and peel away the covering.

Remove the two black rubber sheaths around the edges of the speaker.

Under the symbol-marked sheath there is a white rubber covering for the buttons. Peel this away to reveal the panel underneath.

On two corners of its triangular face there is a small divot, which allows you to use your fingernails or a pair of tweezers to grip and peel away the covering.

1024

Step 2

• Use a JIS #0 screwdriver to remove the six screws to expose the motherboard.

Use a JIS #0 screwdriver to remove the six screws to expose the motherboard.

Step 3

• Using a pair of tweezers, pinch and pull the rubber fillings obstructing the screws.

Using a pair of tweezers, pinch and pull the rubber fillings obstructing the screws.

Step 4

• Using a JIS #0 screwdriver, remove the 6 screws holding the backplate in.
• Remove the back panel off of the device.

Using a JIS #0 screwdriver, remove the 6 screws holding the backplate in.

Remove the back panel off of the device.

Step 5

              Micro USB Port               

• Gently push the ports away from the speaker enclosure with the spudger to free the motherboard.

Gently push the ports away from the speaker enclosure with the spudger to free the motherboard.

Step 6

• With your solderwick and soldering iron, remove the solder at each point, and gently pull the micro USB port away from the motherboard with the tweezers.
• More information on soldering, please read the How to Solder and Desolder Connections Guide.

With your solderwick and soldering iron, remove the solder at each point, and gently pull the micro USB port away from the motherboard with the tweezers.

More information on soldering, please read the How to Solder and Desolder Connections Guide.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Ian                     

Member since: 01/16/2020

353 Reputation

                                      3 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       Embry-Riddle Aeronautical University, Team S6-G9, Rauch Spring 2020                        

                                                  Member of Embry-Riddle Aeronautical University, Team S6-G9, Rauch Spring 2020 



                    ERAU-RAUCH-S20S6G9                     


                                            3 Members                     


                                            6 Guides authored