Difficulty
Easy
Steps
6
Time Required
Suggest a time??
Sections
1
- Open bObi Pet Robotic Vacuum for Repair
- 6 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackbObi Pet Robotic Vacuum and Mop
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Turn bObi Pet Off
- Before we get started, turn bObi Pet OFF and flip her over onto a flat surface.
- Next, remove bObi Pet’s dustbin. Grip the small tab on the back of the bin, and pull to remove.
Before we get started, turn bObi Pet OFF and flip her over onto a flat surface.
Next, remove bObi Pet’s dustbin. Grip the small tab on the back of the bin, and pull to remove.
1024
Step 2
Remove the Front Wheel
- Grip the front wheel and pull straight up, using the screwdriver for leverage.
- The wheel will pop out and you will see two screws beneath it.
- There is a larger screw set deeper in the wheel compartment. Use the screwdriver to remove it.
- Remember to keep all screws and parts removed from bObi Pet safely aside during the repair. They may be needed for re-assembly.
Grip the front wheel and pull straight up, using the screwdriver for leverage.
The wheel will pop out and you will see two screws beneath it.
There is a larger screw set deeper in the wheel compartment. Use the screwdriver to remove it.
Remember to keep all screws and parts removed from bObi Pet safely aside during the repair. They may be needed for re-assembly.
Step 3
Remove the Dustbin's Holders
- Remove the screws on both sides of bObi Pet’s dustbin. Then, remove the corner pieces that were held down by the screws.
- Grip the brush compartment and pull down to reveal two screws on a red fastener.
- Remove them with the screwdriver.
Remove the screws on both sides of bObi Pet’s dustbin. Then, remove the corner pieces that were held down by the screws.
Grip the brush compartment and pull down to reveal two screws on a red fastener.
Remove them with the screwdriver.
Step 4
Remove the Main Brush Attachment
- Pull the brush compartment up until the fastener is freed from bObi Pet. Then, detach the brush compartment’s circuit plug and set it aside.
- Remove the 4 screws located beneath the brush compartment.
Pull the brush compartment up until the fastener is freed from bObi Pet. Then, detach the brush compartment’s circuit plug and set it aside.
Remove the 4 screws located beneath the brush compartment.
Step 5
Remove the Cover Screws
- Remove the 2 screws on the dustbin’s red fastener.
- Remove the fastener and set it aside for reassembly.
- The cover is no longer secured, so carefully flip bObi Pet onto her wheels.
Remove the 2 screws on the dustbin’s red fastener.
Remove the fastener and set it aside for reassembly.
The cover is no longer secured, so carefully flip bObi Pet onto her wheels.
Step 6
Detach the Cover
- Lift the cover to reveal the main board underneath.
- Remove the two circuit plugs connecting the lid to the mainboard.
- bObi Pet’s cover is entirely separated, and you may now access any of her internal parts for replacement.
Lift the cover to reveal the main board underneath.
Remove the two circuit plugs connecting the lid to the mainboard.
bObi Pet’s cover is entirely separated, and you may now access any of her internal parts for replacement.
To reassemble bObi Pet, follow these instructions in reverse order after completing an internal repair.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Chelsea
Member since: 09/24/2014
2,278 Reputation
31 Guides authored
Badges:
11
+8 more badges
