Difficulty

Difficult

Steps

15

Time Required

                          15 minutes

Sections

5

  • Rear Case
  • 2 steps
  • Battery
  • 5 steps
  • Motherboard
  • 2 steps
  • Headphone Jack and Speaker Cover
  • 2 steps
  • Screen
  • 4 steps

Flags

0

  • BackOPPO N1

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Rear Case
  • Insert the plastic opening tool into the crevice. The back cover is most easily opened by starting at this location.

Insert the plastic opening tool into the crevice. The back cover is most easily opened by starting at this location.

1024

Step 2

  • In the photo we rotated the phone ninety degrees counterclockwise.
  • Gently slide the plastic opening tool around the edge of the phone to release the back cover from the phone. You may hear some snapping noises as you release the back cover.
  • The rear case should then come free.

In the photo we rotated the phone ninety degrees counterclockwise.

Gently slide the plastic opening tool around the edge of the phone to release the back cover from the phone. You may hear some snapping noises as you release the back cover.

The rear case should then come free.

Step 3

              Battery
  • Remove the six 4mm long screws holding the motherboard in with the ph0 Phillips head screw driver.

Remove the six 4mm long screws holding the motherboard in with the ph0 Phillips head screw driver.

Step 4

  • Use the tweezers or your fingers to remove the sliver plates.

Use the tweezers or your fingers to remove the sliver plates.

Step 5

  • Remove the black plate with your fingers.

Remove the black plate with your fingers.

Step 6

  • Use tweezers or your fingers to pull up the connector tabs.

Use tweezers or your fingers to pull up the connector tabs.

Step 7

  • Use the blue opening tool to carefully pry the battery from the sticky tape that attaches it to the device.

Use the blue opening tool to carefully pry the battery from the sticky tape that attaches it to the device.

Step 8

              Motherboard
  • Use tweezers or fingers to remove the three connector tabs.

Use tweezers or fingers to remove the three connector tabs.

Step 9

  • Use tweezers or your fingers to remove the motherboard.

Use tweezers or your fingers to remove the motherboard.

Step 10

              Headphone Jack and Speaker Cover
  • Remove the two 4mm long screws using the ph0 Phillips head screw driver.
  • Remove the six 3mm long screws using the ph0 Phillips head screw driver.

Remove the two 4mm long screws using the ph0 Phillips head screw driver.

Remove the six 3mm long screws using the ph0 Phillips head screw driver.

Step 11

  • Use tweezers or your fingers to remove the plastic cover.

Use tweezers or your fingers to remove the plastic cover.

Step 12

              Screen
  • Use tweezers to disconnect the connector tab.

Use tweezers to disconnect the connector tab.

Step 13

  • Use tweezers to peel the black strip from the sticky tape attached to the phone so that the black strip will slide through the phone once the screen is removed.
  • Be gentle removing the black strip at this stage. It can easily tear and it must be removed in order to remove the screen.

Use tweezers to peel the black strip from the sticky tape attached to the phone so that the black strip will slide through the phone once the screen is removed.

Be gentle removing the black strip at this stage. It can easily tear and it must be removed in order to remove the screen.

Step 14

  • Insert the blue opening tool into the crevice between the screen and the main body of the phone. Gently slide the tool around the edge of the phone.

Insert the blue opening tool into the crevice between the screen and the main body of the phone. Gently slide the tool around the edge of the phone.

Step 15

  • Insert the blue opening tool in between the black screen and the white border and slide it around the edge of the black screen.

Insert the blue opening tool in between the black screen and the white border and slide it around the edge of the black screen.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      10 other people completed this guide.

Author

                                      with 3 other contributors 


                    Joshua Stone

Member since: 09/26/2014

1,058 Reputation

                                      5 Guides authored                  



                       Badges:
                       15







                                                        +12 more badges

Team

                       USF Tampa, Team 13-5, Staggers Fall 2014                        

                                                  Member of USF Tampa, Team 13-5, Staggers Fall 2014 



                    USFT-STAGGERS-F14S13G5                     


                                            3 Members                     


                                            8 Guides authored