Difficulty
Easy
Steps
5
Time Required
5 minutes
Sections
2
- Oregon Scientific Meep! 4.0 Disassembly
- 2 steps
- Microphone
- 3 steps
Flags
0
BackOregon Scientific Meep! 4.0
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Oregon Scientific Meep! 4.0 Disassembly
- Use a screwdriver to remove the four 7.0 mm Philips #00 screws from the back of the device.
Use a screwdriver to remove the four 7.0 mm Philips #00 screws from the back of the device.
1024
Step 2
- Use a plastic opening tool to detach the clips on the inside of the device.
Use a plastic opening tool to detach the clips on the inside of the device.
Step 3
Microphone
- Use a screwdriver to remove the three 7.0 mm Philips #00 screws and unscrew the motherboard.
Use a screwdriver to remove the three 7.0 mm Philips #00 screws and unscrew the motherboard.
Step 4
- Use a plastic opening tool to release the three ribbon cables attached to the motherboard.
Use a plastic opening tool to release the three ribbon cables attached to the motherboard.
Step 5
- Lift up the motherboard and use a soldering station to remove the microphone from its wires.
Lift up the motherboard and use a soldering station to remove the microphone from its wires.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Jess Forte
Member since: 09/25/2015
434 Reputation
4 Guides authored
Badges:
11
+8 more badges
Team
University of Tampa, Team 1-3, Whiteside Fall 2015
Member of University of Tampa, Team 1-3, Whiteside Fall 2015
UT-WHITESIDE-F15S1G3
3 Members
12 Guides authored
