Oregon Scientific Meep 4 0 Screen Replacement Repair Guide

Difficulty

Moderate

Steps

9

Time Required

                          10 minutes            

Sections

2

• Oregon Scientific Meep! 4.0 Disassembly
• 2 steps
• Screen
• 7 steps

Flags

0

• BackOregon Scientific Meep! 4.0

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Oregon Scientific Meep! 4.0 Disassembly               

• Use a screwdriver to remove the four 7.0 mm Philips #00 screws from the back of the device.

Use a screwdriver to remove the four 7.0 mm Philips #00 screws from the back of the device.

1024

Step 2

• Use a plastic opening tool to detach the clips on the inside of the device.

Use a plastic opening tool to detach the clips on the inside of the device.

Step 3

              Screen               

• Remove the black tape holding the battery in place.

Remove the black tape holding the battery in place.

Step 4

• Use a spudger to separate the battery from its adhesive.

Use a spudger to separate the battery from its adhesive.

Step 5

• Use a screwdriver to unscrew the three 4.0 mm Philips #00 screws holding the motherboard in place.

Use a screwdriver to unscrew the three 4.0 mm Philips #00 screws holding the motherboard in place.

Step 6

• Use a plastic opening tool and place the tip in between the white and black pieces holding in the ribbon cable in to release the three ribbon cables around the motherboard.

Use a plastic opening tool and place the tip in between the white and black pieces holding in the ribbon cable in to release the three ribbon cables around the motherboard.

Step 7

• Remove the motherboard and unscrew the twelve 7.0 Phillips #00 screws holding the metal casing around the screen in.

Remove the motherboard and unscrew the twelve 7.0 Phillips #00 screws holding the metal casing around the screen in.

Step 8

• Use a plastic opening tool to undo the metal clips holding the screen in place.

Use a plastic opening tool to undo the metal clips holding the screen in place.

Step 9

• Remove the plastic over the screen and use a spudger or plastic opening tool to remove the screen from the sticky adhesive.

Remove the plastic over the screen and use a spudger or plastic opening tool to remove the screen from the sticky adhesive.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Lauren Milici                     

Member since: 09/21/2015

216 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       University of Tampa, Team 1-3, Whiteside Fall 2015                        

                                                  Member of University of Tampa, Team 1-3, Whiteside Fall 2015 



                    UT-WHITESIDE-F15S1G3                     


                                            3 Members                     


                                            12 Guides authored