Difficulty
Easy
Steps
4
Time Required
5 minutes
Sections
2
- Oregon Scientific Meep! 4.0 Disassembly
- 2 steps
- Speakers
- 2 steps
Flags
0
BackOregon Scientific Meep! 4.0
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Oregon Scientific Meep! 4.0 Disassembly
- Use a screwdriver to remove the four 7.0 mm Philips #00 screws from the back of the device.
Use a screwdriver to remove the four 7.0 mm Philips #00 screws from the back of the device.
1024
Step 2
- Use a plastic opening tool to detach the clips on the inside of the device.
Use a plastic opening tool to detach the clips on the inside of the device.
Step 3
Speakers
- Remove the electric tape holding the wires of the speakers in place and gently pull the speakers out of their slots in the device.
Remove the electric tape holding the wires of the speakers in place and gently pull the speakers out of their slots in the device.
Step 4
- Use a soldering station to separate the wires from the speakers.
Use a soldering station to separate the wires from the speakers.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Jess Forte
Member since: 09/25/2015
434 Reputation
4 Guides authored
Badges:
11
+8 more badges
Team
University of Tampa, Team 1-3, Whiteside Fall 2015
Member of University of Tampa, Team 1-3, Whiteside Fall 2015
UT-WHITESIDE-F15S1G3
3 Members
12 Guides authored
