Difficulty

Moderate

Steps

4

Time Required

                          15 - 30 minutes            

Sections

1

  • Power Switch
  • 4 steps

Flags

0

  • BackOregon Scientific RM318PA

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery Compartment Cover               
  • Hold clock so that the clock face is facing away from you.
  • Using your thumbs, push up on the battery cover.
  • Once battery cover is removed, pull down on AC Adapter Jack.

Hold clock so that the clock face is facing away from you.

Using your thumbs, push up on the battery cover.

Once battery cover is removed, pull down on AC Adapter Jack.

1024

Step 2

              Batteries               
  • Use one hand to stabilize the clock.
  • Using your other hand, push batteries toward spring and pull out at an angle.

Use one hand to stabilize the clock.

Using your other hand, push batteries toward spring and pull out at an angle.

Step 3

              Back of Projection Clock               
  • Use a Plastic Opening Tool to pry off the silver casing on the back.
  • Pry at the top of device.
  • Once the back is open at the top, pry at the side of the device closest to the battery compartment.
  • On/Off switch should come off with casing.

Use a Plastic Opening Tool to pry off the silver casing on the back.

Pry at the top of device.

Once the back is open at the top, pry at the side of the device closest to the battery compartment.

On/Off switch should come off with casing.

Step 4

              On/Off Switch               
  • Insert switch into slot as shown in picture. Push in until you hear a “click.”
  • Replace the back of the clock by pressing cover back into place.

Insert switch into slot as shown in picture. Push in until you hear a “click.”

Replace the back of the clock by pressing cover back into place.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Maxine Holden                     

Member since: 10/27/2014

476 Reputation

                                      4 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       Eastern Washington University, Team 1-6, Carnegie Fall 2015                        

                                                  Member of Eastern Washington University, Team 1-6, Carnegie Fall 2015 



                    EWU-CARNEGIE-F15S1G6                     


                                            1 Member                     


                                            4 Guides authored