Difficulty

Moderate

Steps

6

Time Required

                          15 minutes

Sections

1

  • Osmo Mobile Handle Disassembly
  • 6 steps

Flags

0

  • BackDJI Osmo Mobile

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Osmo Mobile Handle Disassembly
  • Remove gimbal from base handle by loosening round plate found at the top of the handle.

Remove gimbal from base handle by loosening round plate found at the top of the handle.

1024

Step 2

  • Use Phillips #00 screwdriver to remove the three screws found on the gimbal stabilizer to detach handle from gimbal.
  • Carefully detach handle from gimbal and disconnect the cable that connects the two.

Use Phillips #00 screwdriver to remove the three screws found on the gimbal stabilizer to detach handle from gimbal.

Carefully detach handle from gimbal and disconnect the cable that connects the two.

Step 3

  • Locate the hex screws found at the top base of the handle, and unscrew using the 1.5mm hex screwdriver.

Locate the hex screws found at the top base of the handle, and unscrew using the 1.5mm hex screwdriver.

Step 4

  • Remove joystick by gently pulling away from handle

Remove joystick by gently pulling away from handle

Step 5

  • Remove the quick release PCBA by locating the connecting wires and release the ribbon cable with tweezers.
  • Use the spudger to pry open and remove the face plate, starting at the back of the handle.

Remove the quick release PCBA by locating the connecting wires and release the ribbon cable with tweezers.

Use the spudger to pry open and remove the face plate, starting at the back of the handle.

Step 6

  • Locate four screws directly on top of handle.
  • Unscrew the silver, bottom two screws, that are closest to the face plate using the 00 screwdriver.
  • Unscrew the black, top two screws, located furthest from the face plate, using the 0 screwdriver.
  • Remove the remaining two screws found on the front of the faceplate.
  • Remove the rest of the face plate shell.

Locate four screws directly on top of handle.

Unscrew the silver, bottom two screws, that are closest to the face plate using the 00 screwdriver.

Unscrew the black, top two screws, located furthest from the face plate, using the 0 screwdriver.

Remove the remaining two screws found on the front of the faceplate.

Remove the rest of the face plate shell.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 3 other contributors 


                    Ustena Safa

Member since: 09/28/2017

309 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       USF Tampa, Team S2-G1, Nance Fall 2017                        

                                                  Member of USF Tampa, Team S2-G1, Nance Fall 2017 



                    USFT-NANCE-F17S2G1                     


                                            4 Members                     


                                            6 Guides authored

Guitt97ii - Oct 14, 2018

Reply

Bonjour,

La toute première étape est trop vague pouvez-vous donner plus de détails svp.

Je vous remercie d’avance

John M O’Donovan - Jun 10, 2019

Reply

I would not call that a handle disassembly. This instruction takes you up to the things you need to do PRIOR to disassembly.

I can show you the rest in a video format if you’re interested

michelle Moore - Dec 7, 2019

Reply

My osmo has snapped off at the metal camera attachment. Can this be repaired ?

Emile Jansen - Dec 24, 2019

Your help would be greatly appreciated

Emile Jansen - Dec 24, 2019

Reply

Hi Michelle… The same happened to me… have you gotten yours repaired.?