Difficulty

Easy

Steps

4

Time Required

Suggest a time??

Sections

1

  • Osram Lightify Disassembly
  • 4 steps

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackOsram Lightify

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Osram Lightify Disassembly
  • Remove the front using a metal spudger.
  • Once you can get your fingers in, remove the rest using your hand.

Remove the front using a metal spudger.

Once you can get your fingers in, remove the rest using your hand.

1024

Step 2

  • On the back of the front cover, remove the white plastic using a metal spudger.
  • Remove the PCB using a spudger

On the back of the front cover, remove the white plastic using a metal spudger.

Remove the PCB using a spudger

Step 3

  • Once the PCB is removed, use a Torx T9 screwdriver to unscrew and remove the power supply.
  • Remove the screws holding on the back cover with a Torx T9 screwdriver and remove the back cover.
  • all the screws are the same. they can be mixed with no problem.

Once the PCB is removed, use a Torx T9 screwdriver to unscrew and remove the power supply.

Remove the screws holding on the back cover with a Torx T9 screwdriver and remove the back cover.

all the screws are the same. they can be mixed with no problem.

Step 4

  • Remove the button by grabbing the tab over the button and pulling it out.
  • it will not come out if the button is not depressed.
  • Remove both metal sheets. when its at an angle, push it in a little and then pull it up so that it is pointing straight up. then, you can push it through.

Remove the button by grabbing the tab over the button and pulling it out.

it will not come out if the button is not depressed.

Remove both metal sheets. when its at an angle, push it in a little and then pull it up so that it is pointing straight up. then, you can push it through.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    Aiden

Member since: 09/19/2015

16,424 Reputation

                                      20 Guides authored                  



                       Badges:
                       49







                                                        +46 more badges