Oster Ckststmd5 W Disassembly Repair Guide

Difficulty

Easy

Steps

Time Required

                          20 minutes

Sections

Oster CKSTSTMD5-W Disassembly
29 steps

Flags

BackOster CKSTSTMD5-W
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

It highlights the disassembly of the electrical heating components of the steamer. For this guide, you will need a phillips screwdriver, scissors, and a ratchet with a 7mm socket. We recommend using the iFixit screwdriver with the J1 tip.

This guide is not difficult and can be accomplished by all experience levels. Make sure the device is unplugged from the wall and has not been in use for several hours before disassembling - this will ensure there are no hazards to your body and face.

What you need

Step 1

              Oster CKSTSTMD5-W Disassembly

Remove the plastic steamer tiers and make sure the device is unplugged.

Remove the plastic steamer tiers and make sure the device is unplugged.

1024

Step 2

Flip the device upside down so that the sticker is facing upwards.
Using your hands, carefully pry out the four rubber feet from each of the corners.

Flip the device upside down so that the sticker is facing upwards.

Using your hands, carefully pry out the four rubber feet from each of the corners.

Step 3

Using the JIS #1 screwdriver, remove four 12 mm screws from the four holes.

Using the JIS #1 screwdriver, remove four 12 mm screws from the four holes.

Step 4

Once the four screws are removed, lift the bottom of the device off of the frame.

Once the four screws are removed, lift the bottom of the device off of the frame.

Step 5

Use a pair of scissors to cut the zip tie binding the blue and brown wires together.

Use a pair of scissors to cut the zip tie binding the blue and brown wires together.

Step 6

Using a socket wrench with a 7 mm bit, unscrew the nut from the center of the metal ring.

Using a socket wrench with a 7 mm bit, unscrew the nut from the center of the metal ring.

Step 7

Remove the nut and the two washers from the center bolt.

Remove the nut and the two washers from the center bolt.

Step 8

Lift off the metal brace from the bolt in the center of the device.

Lift off the metal brace from the bolt in the center of the device.

Step 9

From the center of the device, carefully grab the blue wire and lift the thermal fuse from its socket.

From the center of the device, carefully grab the blue wire and lift the thermal fuse from its socket.

Step 10

Using your hands, carefully lift the wires over the center bolt so that they are out of the way.

Using your hands, carefully lift the wires over the center bolt so that they are out of the way.

Step 11

Using your index finger, carefully pry the metal sheeting out from under the wires.

Using your index finger, carefully pry the metal sheeting out from under the wires.

Step 12

Using the JIS #1 screwdriver, remove the two 12 mm screws from the left side of the device.
Lift off the white plastic brace.

Using the JIS #1 screwdriver, remove the two 12 mm screws from the left side of the device.

Lift off the white plastic brace.

Step 13

Lift the white power cord out of its socket.

Lift the white power cord out of its socket.

Step 14

On the left-hand side of the device, carefully remove the indicator light from its place next to the timer by pulling on the heat protector covering the brown wire.
Be careful to ensure the bulb stays attached to the wire.

On the left-hand side of the device, carefully remove the indicator light from its place next to the timer by pulling on the heat protector covering the brown wire.

Be careful to ensure the bulb stays attached to the wire.

Step 15

Using the JIS #1 screwdriver, remove the two 12 mm screws attached on each side of the timer.

Using the JIS #1 screwdriver, remove the two 12 mm screws attached on each side of the timer.

Step 16

Using your hands, carefully lift the white plastic barrier out of the device from the right side of the timer.
Be careful not to impede the blue and brown wires connecting the heating element to the timer.

Using your hands, carefully lift the white plastic barrier out of the device from the right side of the timer.

Be careful not to impede the blue and brown wires connecting the heating element to the timer.

Step 17

Rotate the device so that the dial faces you.
Using the plastic opening tool, pry the white dial out of the timer socket.

Rotate the device so that the dial faces you.

Using the plastic opening tool, pry the white dial out of the timer socket.

Step 18

Pull the white dial the rest of the way out of the socket.

Pull the white dial the rest of the way out of the socket.

Step 19

Using the JIS #1 screwdriver, remove the two 12 mm screws from the top and bottom of the timer socket.

Using the JIS #1 screwdriver, remove the two 12 mm screws from the top and bottom of the timer socket.

Step 20

Using your fingers, pry out the black timer socket from the front hole.

Using your fingers, pry out the black timer socket from the front hole.

Step 21

Using your hands, carefully lift the timer out of the socket and away from the device.
Be careful not to pull too hard as to not break the wire connection.

Using your hands, carefully lift the timer out of the socket and away from the device.

Be careful not to pull too hard as to not break the wire connection.

Step 22

Using the JIS #1 screwdriver, remove the two 4.3 mm screws from the right and left side of the timer.
Using your hands, lift off the black plastic cover.

Using the JIS #1 screwdriver, remove the two 4.3 mm screws from the right and left side of the timer.

Using your hands, lift off the black plastic cover.

Step 23

Using the JIS #1 screwdriver, remove the two 4.3 mm screws from the right and left side of the timer.

Step 24

Using the plastic opening tool, bend the 3 metal braces towards the outside of the timer so that the metal fits through the slots.

Using the plastic opening tool, bend the 3 metal braces towards the outside of the timer so that the metal fits through the slots.

Step 25

Lift the silver cover off of the timer.

Lift the silver cover off of the timer.

Step 26

Lift the metal silver plate off of the timer.

Lift the metal silver plate off of the timer.

Step 27

Using the JIS #1 screwdriver, remove the single 4.3mm screw from the top center of the timer.

Using the JIS #1 screwdriver, remove the single 4.3mm screw from the top center of the timer.

Step 28

Lift the black plastic casing out from in between the front and back of the timer.

Lift the black plastic casing out from in between the front and back of the timer.

Step 29

Rotate the timer 90 degrees to the left so that you can see it from the side.
Lift the silver back casing off of the timer.

Rotate the timer 90 degrees to the left so that you can see it from the side.

Lift the silver back casing off of the timer.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Attached Documents

Schematic FINAL
PDF - 62.99 kb
View

Schematic FINAL

PDF - 62.99 kb

Author

                                      with 2 other contributors

                    Arielle Weinstein

Member since: 09/16/2021

459 Reputation

                                      1 Guide authored                  



                       Badges:
                       4





                                                        +1 more badge

Team

                       Tufts University School of Engineering, Team 1-6, Bell Fall 2021                        

                                                  Member of Tufts University School of Engineering, Team 1-6, Bell Fall 2021 



                    TUFTS-BELL-F21S1G6                     


                                            2 Members                     


                                            1 Guide authored

Introduction#

What you need#

Attached Documents#

Team#

Introduction

What you need

Attached Documents

Team