Difficulty

Easy

Steps

8

Time Required

                          30 - 45 minutes

Sections

1

  • Oster DuraCeramic Titanium Infused 6-Cup Rice and Grain Cooker with Steamer Disassembly
  • 8 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackOster DuraCeramic Titanium Infused 6-Cup Rice and Grain Cooker with Steamer

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Accessories
  • Remove the lid, steamer pot, and tray from the base unit.

Remove the lid, steamer pot, and tray from the base unit.

1024

Step 2

              Bottom Cover
  • Flip the base unit over.
  • Remember to unplug your rice cooker before proceeding with teardown.
  • Remove the two Phillips screws.
  • Set aside all screws, keeping them in order by steps to help reconstruction.
  • Remove the bottom cover.

Flip the base unit over.

Remember to unplug your rice cooker before proceeding with teardown.

Remove the two Phillips screws.

Set aside all screws, keeping them in order by steps to help reconstruction.

Remove the bottom cover.

Step 3

              Fuse
  • Remove the three Phillips screws
  • Remove the fuse from the unit.

Remove the three Phillips screws

Remove the fuse from the unit.

Step 4

              Front Panel and Lever
  • Flip the unit over.
  • Remove the two Phillips screws.
  • Flip the unit back over.

Flip the unit over.

Flip the unit back over.

Step 5

              Front Panel and Lever
  • Remove the single Phillips Screw.
  • Bend the tabs inward with needle nose pliers to mirror the shape of the hole below it.
  • Be careful not to bend these tabs too much or too far, for they break off easily if bent back and forth too many times.
  • Lift the lever out of the tab.
  • Carefully pull the front panel and lever out the front of the base.

Remove the single Phillips Screw.

Bend the tabs inward with needle nose pliers to mirror the shape of the hole below it.

Be careful not to bend these tabs too much or too far, for they break off easily if bent back and forth too many times.

Lift the lever out of the tab.

Carefully pull the front panel and lever out the front of the base.

Step 6

              Circuit Board
  • Remove the Phillips screw.
  • Carefully remove the circuit board from the front panel.

Remove the Phillips screw.

Carefully remove the circuit board from the front panel.

Step 7

              Heating Coil
  • Remove the nut using an adjustable wrench.
  • Remove the power connector extender.
  • Remove the three Phillips Screws.
  • This screw is slightly longer than the other two.
  • The heating coil will fall out after the removal of the last screw. Holding the coil while unscrewing the last screw is suggested to prevent damage to the coil.

Remove the nut using an adjustable wrench.

Remove the power connector extender.

Remove the three Phillips Screws.

This screw is slightly longer than the other two.

The heating coil will fall out after the removal of the last screw. Holding the coil while unscrewing the last screw is suggested to prevent damage to the coil.

Step 8

              Thermomagnet
  • Bend the three tabs flat.
  • Remove the thermomagnet assembly from the heating coil.

Bend the three tabs flat.

Remove the thermomagnet assembly from the heating coil.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Michael Chan

Member since: 04/14/2015

2,329 Reputation

                                      4 Guides authored                  



                       Badges:
                       19







                                                        +16 more badges

Team

                       Cal Poly, Team 6-16, Maness Spring 2015                        

                                                  Member of Cal Poly, Team 6-16, Maness Spring 2015 



                    CPSU-MANESS-S15S6G16                     


                                            4 Members                     


                                            13 Guides authored