Oster Expressbake Ckstbrtw20 Top Panel Buttons Replacement Repair Guide

Difficulty

Moderate

Steps

10

Time Required

                          15 minutes            

Sections

2

• Top Panel Removal
• 4 steps
• Top Panel Buttons
• 6 steps

Flags

0

• BackOster Expressbake CKSTBRTW20

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Top Panel Removal               

• Remove the bread pan.

Remove the bread pan.

1024

Step 2

• Remove the eight 22mm Phillips #1 screws from the grey lining.
• Remove the grey liner.

Remove the eight 22mm Phillips #1 screws from the grey lining.

Remove the grey liner.

Step 3

• Remove the two 11mm Phillips #1 screws from the back of the device.

Remove the two 11mm Phillips #1 screws from the back of the device.

Step 4

• Pop off the top case using a spudger.
• Keep the spudger away from the control panel.
• Be aware of wires connecting the microcontroller to the panel when removing the top lining.

Pop off the top case using a spudger.

Keep the spudger away from the control panel.

Be aware of wires connecting the microcontroller to the panel when removing the top lining.

Step 5

              Top Panel Buttons               

• Disconnect microcontroller and top lining.
• Ground yourself prior to disconnecting in order to avoid harming the inner electronics.

Disconnect microcontroller and top lining.

Ground yourself prior to disconnecting in order to avoid harming the inner electronics.

Step 6

• Remove the two 11mm Phillips #1 screws from the top cover.

Remove the two 11mm Phillips #1 screws from the top cover.

Step 7

• Use spudger to pop the control panel out.

Use spudger to pop the control panel out.

Step 8

• Remove the four 11mm Phillips #1 screws from the control panel.

Remove the four 11mm Phillips #1 screws from the control panel.

Step 9

• Remove the two 11mm Phillips #1 screws from the button panel.
• Flip the screen assembly over and remove the button panel.

Remove the two 11mm Phillips #1 screws from the button panel.

Flip the screen assembly over and remove the button panel.

Step 10

• Remove and replace buttons as necessary.

Remove and replace buttons as necessary.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Megan Saunders                     

Member since: 01/25/2018

701 Reputation

                                      5 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       USF Tampa, Team S7-G5, Passmore Spring 2018                        

                                                  Member of USF Tampa, Team S7-G5, Passmore Spring 2018 



                    USFT-PASSMORE-S18S7G5                     


                                            4 Members                     


                                            5 Guides authored