Difficulty

Moderate

Steps

11

Time Required

                          45 minutes

Sections

1

  • Osterizer Blender 14 Speed All Metal Drive Disassembly
  • 11 steps

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackOsterizer Blender 14 Speed All Metal Drive

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Osterizer Blender 14 Speed All Metal Drive Disassembly
  • Take the blender and place the top, cup, and blades aside
  • Blades of the blender are sharp, so when setting aside do not cut yourself

Take the blender and place the top, cup, and blades aside

Blades of the blender are sharp, so when setting aside do not cut yourself

1024

Step 2

  • Flip over the base containing the motor of the blender
  • Use the Phillips Head Screwdriver to remove the 4 screws as pictured

Flip over the base containing the motor of the blender

Use the Phillips Head Screwdriver to remove the 4 screws as pictured

Step 3

  • Remove the bottom panel

Remove the bottom panel

Step 4

  • Use an 11mm screwdriver to remove the screw from the fan blade
  • Remove the fan blade

Use an 11mm screwdriver to remove the screw from the fan blade

Remove the fan blade

Step 5

  • Locate the washer beneath the fan and remove it from the motor
  • To remove the washer, twist it in a counterclockwise motion

Locate the washer beneath the fan and remove it from the motor

To remove the washer, twist it in a counterclockwise motion

Step 6

  • Use a 6.5mm wrench and extender to remove the 2 screws holding the top of the motor in place

Use a 6.5mm wrench and extender to remove the 2 screws holding the top of the motor in place

Step 7

  • Take out the motor and copper wires from the blender

Take out the motor and copper wires from the blender

Step 8

  • Disconnect the 2 white wires that connect the motor to the motherboard
  • These 2 wires have silver tips

Disconnect the 2 white wires that connect the motor to the motherboard

These 2 wires have silver tips

Step 9

  • Remove the 4 bolts connecting the motor to the blender wall using a socket wrench

Remove the 4 bolts connecting the motor to the blender wall using a socket wrench

Step 10

  • Flip the blender back over to the original position and remove the metal disk located at the top of the blender using pliers

Flip the blender back over to the original position and remove the metal disk located at the top of the blender using pliers

Step 11

  • Fully remove the motor from the blender

Fully remove the motor from the blender

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Kaia Williams

Member since: 11/22/2022

193 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       Group 2 ENGR communications project                        

                                                  Member of Group 2 ENGR communications project 



                    Community                     


                                            4 Members                     


                                            1 Guide authored