Packard Bell 4X4 Desktop Drive Cage Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

                          10 - 15 minutes            

Sections

2

• Top Cover
• 3 steps
• Drive Cage
• 5 steps

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackPackard Bell 4X4 Desktop

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Top Cover               

• Using a Phillips screwdriver, remove the three Phillips head screws (circled in red) from the back of the computer.

Using a Phillips screwdriver, remove the three Phillips head screws (circled in red) from the back of the computer.

1024

Step 2

• With both hands on each side of the case, slide the top cover toward you. Lift it off the computer.

With both hands on each side of the case, slide the top cover toward you. Lift it off the computer.

Step 3

• The top cover is removed.

The top cover is removed.

Step 4

              Drive Cage               

• Remove the two Philips head screws with your Philips screwdriver. You may have to lubricate these screws as they can be very difficult to remove.

Remove the two Philips head screws with your Philips screwdriver. You may have to lubricate these screws as they can be very difficult to remove.

Step 5

• Remove the 1 Philips head screw from the left hand side of the case if there is one. Again, you may need to lubricate this screw.

Remove the 1 Philips head screw from the left hand side of the case if there is one. Again, you may need to lubricate this screw.

Step 6

• Once the screws are removed, disconnect all cables from the optical drive, hard drive and floppy drive.

Once the screws are removed, disconnect all cables from the optical drive, hard drive and floppy drive.

Step 7

• Slide the drive cage back. An easy way to do this is the push on the optical drive from the front.

Slide the drive cage back. An easy way to do this is the push on the optical drive from the front.

Step 8

• Lift the drive cage up and out of the computer.

Lift the drive cage up and out of the computer.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Brandon S                     

Member since: 09/04/2010

490 Reputation

                                      3 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       Packard Bell Planet                        

                                                  Member of Packard Bell Planet 



                    Community                     


                                            1 Member                     


                                            6 Guides authored