Difficulty
Moderate
Steps
6
Time Required
10 - 15 minutes
Sections
2
- Battery
- 2 steps
- Speaker
- 4 steps
Flags
1
Markup Mishap
This guide needs better markups. Help out by correcting or making some markup annotations.
BackPalm Pre Plus P101UNA
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Battery
- Push in the button at the bottom of the phone, and lift the back cap off.
Push in the button at the bottom of the phone, and lift the back cap off.
1024
Step 2
- Remove the battery by pulling out the little tab.
Remove the battery by pulling out the little tab.
Step 3
Speaker
- Using the 1.5mm hex screwdriver, remove the 6 hex screws from the inner-most casing.
Using the 1.5mm hex screwdriver, remove the 6 hex screws from the inner-most casing.
Step 4
- Using the spudger, remove the inner case from the phone.
Using the spudger, remove the inner case from the phone.
Step 5
- Unplug the wire from the speaker using the tweezers.
Unplug the wire from the speaker using the tweezers.
Step 6
- Pry out the speaker from the back of the phone using tweezers.
- Applying pressure from the back of the speaker may help.
Pry out the speaker from the back of the phone using tweezers.
Applying pressure from the back of the speaker may help.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
ironwill13791
Member since: 10/30/2013
509 Reputation
5 Guides authored
Badges:
5
+2 more badges
Team
UMass Dartmouth, Team 2-2, Gulbrandsen Fall 2013
Member of UMass Dartmouth, Team 2-2, Gulbrandsen Fall 2013
UMASSD-GULBRANDSEN-F13S2G2
3 Members
10 Guides authored