Difficulty

Moderate

Steps

7

Time Required

                          20 minutes

Sections

1

  • Keyboard
  • 7 steps

Flags

2

Confusing Text

Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackPalm Pre 2

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Keyboard
  • Make sure your Palm Pre 2 is turned off before taking apart the phone.
  • Snap off the back panel to reveal the battery using the opening tool.

Make sure your Palm Pre 2 is turned off before taking apart the phone.

Snap off the back panel to reveal the battery using the opening tool.

1024

Step 2

  • Pull on the tab to remove the battery.

Pull on the tab to remove the battery.

Step 3

  • Use the T5 Torx Screwdriver to remove the six screws that hold the back of the frame in place.

Use the T5 Torx Screwdriver to remove the six screws that hold the back of the frame in place.

Step 4

  • Use a spudger to open the hinge that covers the black and white GPS and DIV antennas.
  • Use tweezers to remove the two antennas from the keypad control board.

Use a spudger to open the hinge that covers the black and white GPS and DIV antennas.

Use tweezers to remove the two antennas from the keypad control board.

Step 5

  • Use the opening tool to pry off the (black and yellow) back frame.

Use the opening tool to pry off the (black and yellow) back frame.

Step 6

  • Use the opening tool to remove the panel on the main part of the phone.
  • Use the tweezers to get access to remove the panel giving access to the cable connectors.
  • Remove the two ribbon cable connectors using the tweezers.

Use the opening tool to remove the panel on the main part of the phone.

Use the tweezers to get access to remove the panel giving access to the cable connectors.

Remove the two ribbon cable connectors using the tweezers.

Step 7

  • Use tweezers to separate the keyboard from the phone.

Use tweezers to separate the keyboard from the phone.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Elliott Van Hoy

Member since: 01/22/2018

256 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       IUPUI, Team S1-G6, Freund Spring 2018                        

                                                  Member of IUPUI, Team S1-G6, Freund Spring 2018 



                    IUPUI-FREUND-S18S1G6                     


                                            2 Members                     


                                            4 Guides authored