Difficulty
Moderate
Steps
10
Time Required
45 minutes - 1 hour
Sections
3
- Battery
- 2 steps
- Back Panel
- 4 steps
- LCD Screen and Touch Screen
- 4 steps
Flags
Grammar Police
Embrace your inner English teacher and help improve this guide’s grammar!
Bullets!
Better coordination with markups and the color/type of bullets will help make this guide more clear!
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
BackPalm Treo 680
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Remove the battery cover by pressing on the small rectangular button located on the back of the phone.
Remove the battery cover by pressing on the small rectangular button located on the back of the phone.
1024
Step 2
- Remove the battery by pulling it out towards you.
Remove the battery by pulling it out towards you.
Step 3
Back Panel
- Remove the stylus in order to access the screw.
- Remove the 27mm top-left screw using a T6 Torx screwdriver.
Remove the stylus in order to access the screw.
Remove the 27mm top-left screw using a T6 Torx screwdriver.
Step 4
- Using the spudger, remove the rubber rectangular cover located in the upper rear, right-hand corner.
- Remove the 27mm screw using the T6 Torx screwdriver.
- If there is a red Palm sticker covering this screw, puncture it to access the screw.
Using the spudger, remove the rubber rectangular cover located in the upper rear, right-hand corner.
Remove the 27mm screw using the T6 Torx screwdriver.
If there is a red Palm sticker covering this screw, puncture it to access the screw.
Step 5
- Remove the remaining two 27mm screws from the bottom using the T6 screwdriver.
Remove the remaining two 27mm screws from the bottom using the T6 screwdriver.
Step 6
- Turn the phone so the screen is facing the right side.
- Use a spudger to carefully separate the back panel from the front panel to access components inside the phone.
- Separate the covers from the left side of the device as indicated in the picture.
- The right side contains orange ribbons that are easily damaged.
Turn the phone so the screen is facing the right side.
Use a spudger to carefully separate the back panel from the front panel to access components inside the phone.
Separate the covers from the left side of the device as indicated in the picture.
The right side contains orange ribbons that are easily damaged.
Step 7
LCD Screen and Touch Screen
- Take the front the pannel and notice that the screen is attached by a piece of silver tape.
- Using a pair of tweezers, carefully peel off this piece of silver tape.
- Remove the screen from the front pannel.
Take the front the pannel and notice that the screen is attached by a piece of silver tape.
Using a pair of tweezers, carefully peel off this piece of silver tape.
Remove the screen from the front pannel.
Step 8
- Obtain a small metal spudger and flip up the 2 tiny plastic flaps that hold the tiny orange ribbons in place.
- Do the same thing for the other flap on the opposite side.
Obtain a small metal spudger and flip up the 2 tiny plastic flaps that hold the tiny orange ribbons in place.
Do the same thing for the other flap on the opposite side.
Step 9
- Flip the screen over a 180 degrees and take off the metal piece that cushions the screen.
- Flip the screen over another a 180 degrees and place pressure on the bottom ribbon (Where my left thumb is).
- Slightly Pull apart the touch screen from the LCD screen by placing your thumbs where my thumbs are. DO NOT PULL THE TWO SCREENS COMPLETELY APART YET.
- This part is tricky and might take some maneuvering and a little bit of force, but it is possible.
Flip the screen over a 180 degrees and take off the metal piece that cushions the screen.
Flip the screen over another a 180 degrees and place pressure on the bottom ribbon (Where my left thumb is).
Slightly Pull apart the touch screen from the LCD screen by placing your thumbs where my thumbs are. DO NOT PULL THE TWO SCREENS COMPLETELY APART YET.
This part is tricky and might take some maneuvering and a little bit of force, but it is possible.
Step 10
- Move your thumbs to the other corner of the screen and repeat the same procedure in step 9.
- Carefully peel the touch screen away from the LCD screen.
- Now you should have both the touch screen and LCD screen detached from one another.
Move your thumbs to the other corner of the screen and repeat the same procedure in step 9.
Carefully peel the touch screen away from the LCD screen.
Now you should have both the touch screen and LCD screen detached from one another.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 5 other contributors
Maiya123
Member since: 10/22/2009
51 Reputation
6 Guides authored
Badges:
9
+6 more badges
Team
Cal Poly, Team 6-4, Maness Fall 2009
Member of Cal Poly, Team 6-4, Maness Fall 2009
CPSU-MANESS-F09S6G4
4 Members
12 Guides authored
chinthalaprasad - Mar 10, 2011
Reply
where can i get the new touch scree, actually my mobile has fallen down and broken the touch scree. i am a resident in India, Andhra Pradesh, Hyderabad……..at Ramkote…. please give me message at chinthala.prasad@yahoo.com please
Ravi Joshi - Mar 29, 2017
Reply
These are very nice instructions. They are clear and detailed for anyone to follow. Thanks for putting together the steps and sharing it.
I have not tried all steps completely yet. But will do so. I will left with probably a question what to do with touch screen. My phone has
never fallen down nor damaged. It worked perfectly well and one fine day, touch screen stopped working. In any case, I will try.
RJ