Difficulty

Moderate

Steps

5

Time Required

                          5 - 8 minutes

Sections

1

  • Back Panel
  • 5 steps

Flags

0

  • BackPalm TX

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel
  • Orient the device so that the display faces forward.
  • Remove the stylus from the right side.

Orient the device so that the display faces forward.

Remove the stylus from the right side.

1024

Step 2

  • Turn over the device so that the back panel faces forward.
  • Use a T5 Torx screwdriver to remove the four 6.35mm corner screws.

Turn over the device so that the back panel faces forward.

Use a T5 Torx screwdriver to remove the four 6.35mm corner screws.

Step 3

  • Rotate the device so that the display faces forward.
  • Insert a plastic opening tool with the angled tip pointing downward into the crevice on the left side of the device.
  • Pry along the crevice to loosen the back panel.
  • Repeat this process for the right side.

Rotate the device so that the display faces forward.

Insert a plastic opening tool with the angled tip pointing downward into the crevice on the left side of the device.

Pry along the crevice to loosen the back panel.

Repeat this process for the right side.

Step 4

  • Carefully pry the back panel to open the device.
  • Be careful not to break the wire that connects the battery pack to the motherboard.
  • When reassembling, snap the back panel back into place and then insert the top cover.

Carefully pry the back panel to open the device.

Be careful not to break the wire that connects the battery pack to the motherboard.

When reassembling, snap the back panel back into place and then insert the top cover.

Step 5

  • Use a plastic opening tool to peel the battery pack from the back panel.
  • The battery pack is glued to the back panel so removing it may require considerable effort.

Use a plastic opening tool to peel the battery pack from the back panel.

The battery pack is glued to the back panel so removing it may require considerable effort.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 5 other contributors 


                    Spencer Lewson

Member since: 01/19/2011

778 Reputation

                                      6 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       Cal Poly, Team 1-15, Amido Winter 2011                        

                                                  Member of Cal Poly, Team 1-15, Amido Winter 2011 



                    CPSU-AMIDO-W11S1G15                     


                                            4 Members                     


                                            7 Guides authored