Difficulty
Moderate
Steps
5
Time Required
Suggest a time??
Sections
1
- Battery
- 5 steps
Flags
2
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackPalm Zire 21
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Remove the two 0.8mm screws located on the back of the device.
Remove the two 0.8mm screws located on the back of the device.
1024
Step 2
- Remove the back cover from the device exposing the battery.
Remove the back cover from the device exposing the battery.
Step 3
- Using a plastic opening tool, small flathead screwdriver, or small knife blade pry the battery away from the motherboard. Be careful not to pry to fast, or you could rip the wires off during this stage.
Using a plastic opening tool, small flathead screwdriver, or small knife blade pry the battery away from the motherboard. Be careful not to pry to fast, or you could rip the wires off during this stage.
Step 4
- Carefully remove the battery from the motherboard.
Carefully remove the battery from the motherboard.
Step 5
- Unwrap the old battery from electrical tape and replace with new battery.
Unwrap the old battery from electrical tape and replace with new battery.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Jeremy Craft
Member since: 09/26/2014
301 Reputation
3 Guides authored
Badges:
5
+2 more badges
Team
USF Sarasota-Manatee, Team 1-1, Stewart Fall 2014
Member of USF Sarasota-Manatee, Team 1-1, Stewart Fall 2014
USFSM-STEWART-F14S1G1
3 Members
7 Guides authored