Difficulty
Moderate
Steps
5
Time Required
Suggest a time??
Sections
1
- Keypad
- 5 steps
Flags
2
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackPalm Zire 21
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Keypad
- Remove the two 0.8 mm screws located on the back of the device.
Remove the two 0.8 mm screws located on the back of the device.
1024
Step 2
- Using tweezers, or something similar flip up the tab, releasing the wires located under the flap.
Using tweezers, or something similar flip up the tab, releasing the wires located under the flap.
Step 3
- Remove the two screws located at the bottom of the mothership, using a Philips head screwdriver.
Remove the two screws located at the bottom of the mothership, using a Philips head screwdriver.
Step 4
- Carefully remove the mother board by lifting up, exposing the keypad.
Carefully remove the mother board by lifting up, exposing the keypad.
Step 5
- Using tweezers, or something similar remove the keypad from the device and replace with a new one.
Using tweezers, or something similar remove the keypad from the device and replace with a new one.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Jeremy Craft
Member since: 09/26/2014
301 Reputation
3 Guides authored
Badges:
5
+2 more badges
Team
USF Sarasota-Manatee, Team 1-1, Stewart Fall 2014
Member of USF Sarasota-Manatee, Team 1-1, Stewart Fall 2014
USFSM-STEWART-F14S1G1
3 Members
7 Guides authored
