Difficulty

Easy

Steps

4

Time Required

                          10 minutes

Sections

1

  • Case
  • 4 steps

Flags

0

  • BackPalm Zire 31

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Case
  • Unscrew the two 7.35mm Torx T6 screws.

Unscrew the two 7.35mm Torx T6 screws.

1024

Step 2

  • Using the flat end of the spudger, carefully pry the black cover on the top from the blue front cover.

Using the flat end of the spudger, carefully pry the black cover on the top from the blue front cover.

Step 3

  • Carefully remove the speaker from the back white cover by just pulling it gently. It is glued on.

Carefully remove the speaker from the back white cover by just pulling it gently. It is glued on.

Step 4

  • Unscrew the #00 5.75mm Phillips screws from the bottom of the motherboard. The front blue panel should fall right off.

Unscrew the #00 5.75mm Phillips screws from the bottom of the motherboard. The front blue panel should fall right off.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    Antonio

Member since: 01/23/2011

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Cal Poly, Team 5-21, Amido Winter 2011                        

                                                  Member of Cal Poly, Team 5-21, Amido Winter 2011 



                    CPSU-AMIDO-W11S5G21                     


                                            4 Members                     


                                            6 Guides authored