Difficulty
Easy
Steps
12
Time Required
5 minutes
Sections
3
- Back Cover
- 6 steps
- Battery
- 4 steps
- Motherboard/Screen
- 2 steps
Flags
2
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Step Trimmer
This guide has unnecessary steps. Trim them to be more concise!
BackPalm Zire 71
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Preparation
- Flip the phone so it’s facing screen-side down.
- Slide the back cover upward to open.
Flip the phone so it’s facing screen-side down.
Slide the back cover upward to open.
1024
Step 2
Top Screws (2) Removal
- Use a Torx T5 screwdriver to remove the top two screws.
Use a Torx T5 screwdriver to remove the top two screws.
Step 3
Bottom Screws (3) Removal
- Remove the back sticker.
- Remove the three bottom Phillips #00 screws.
Remove the back sticker.
Remove the three bottom Phillips #00 screws.
Step 4
Front Panel Removal
- Flip the phone over so it’s facing screen-side up.
- Slide the screen upward by a few millimeters without detaching the screen.
- Use the plastic opening tool to pry off the front panel.
Flip the phone over so it’s facing screen-side up.
Slide the screen upward by a few millimeters without detaching the screen.
Use the plastic opening tool to pry off the front panel.
Step 5
Bracket and Speaker Removal
- Remove the bottom two Phillips #00 screws.
- Remove the bracket.
- Use the plastic opening tool to pry off the speaker.
Remove the bottom two Phillips #00 screws.
Remove the bracket.
Use the plastic opening tool to pry off the speaker.
Step 6
Back Cover
- Slide the back cover off.
Slide the back cover off.
Step 7
Battery
- Remove the Philips #00 screw
- Remove the sliver metal piece
Remove the Philips #00 screw
Remove the sliver metal piece
Step 8
- Remove the Philips screws #00
- Remove the rear blue panel by prying both sides using the plastic opening tool
Remove the Philips screws #00
Remove the rear blue panel by prying both sides using the plastic opening tool
Step 9
- Remove the black plastic sticker
- Pull the tap up to remove the metal cap
Remove the black plastic sticker
Pull the tap up to remove the metal cap
Step 10
- Remove the cable by pinching the sides and pulling
- Pry off the battery with the plastic opening tool
- Insert the new battery
Remove the cable by pinching the sides and pulling
Pry off the battery with the plastic opening tool
Insert the new battery
Step 11
Motherboard/Screen
- Remove Philips screw #00
- Remove black plastic top part
Remove Philips screw #00
Remove black plastic top part
Step 12
- Pull off the orange cable
- Now the screen and the motherboard can be separated
- Finished
Pull off the orange cable
Now the screen and the motherboard can be separated
Finished
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Jinxian Jiang
Member since: 04/28/2011
173 Reputation
3 Guides authored
Badges:
7
+4 more badges
Team
CSU Los Angeles, Team 1-5, Nelson Spring 2011
Member of CSU Los Angeles, Team 1-5, Nelson Spring 2011
CSULA-NELSON-S11S1G5
3 Members
6 Guides authored