Difficulty
Moderate
Steps
4
Time Required
Suggest a time??
Sections
1
- Screen
- 4 steps
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
BackPalm Zire m150
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Screen
- Lift the flap on the Palm Zire M150 to see the back and all of the screws.
Lift the flap on the Palm Zire M150 to see the back and all of the screws.
1024
Step 2
- Use the T6 bit screw driver, and carefully remove the screws at the top of the device.
Use the T6 bit screw driver, and carefully remove the screws at the top of the device.
Step 3
- Turn the device over with the screen facing up. Gently pull the top and bottom cover from the device, as shown in the second photo.
Turn the device over with the screen facing up. Gently pull the top and bottom cover from the device, as shown in the second photo.
Step 4
- Carefully lift the screen from the device, and replace it with a new one.
Carefully lift the screen from the device, and replace it with a new one.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Kate
Member since: 01/26/2016
528 Reputation
5 Guides authored
Badges:
10
+7 more badges
Team
USF Sarasota-Manatee, Team 1-3, Stewart Spring 2016
Member of USF Sarasota-Manatee, Team 1-3, Stewart Spring 2016
USFSM-STEWART-S16S1G3
5 Members
6 Guides authored
