Difficulty

Easy

Steps

7

Time Required

                          10 minutes            

Sections

2

  • Back Casing
  • 4 steps
  • Battery
  • 3 steps

Flags

0

  • BackPanasonic Arc 3

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Casing               
  • Flip the razor over so the back is facing you.

Flip the razor over so the back is facing you.

1024

Step 2

  • Using a Phillips #00 screwdriver, remove the 6 mm screw just above the charger port.

Using a Phillips #00 screwdriver, remove the 6 mm screw just above the charger port.

Step 3

  • Slide the plastic cover at the bottom of the razor downward to remove.

Slide the plastic cover at the bottom of the razor downward to remove.

Step 4

  • Lift up the rear casing from the bottom of the razor.
  • This may require you to gently pry it apart with you fingers.
  • Lift up the rear casing from the sides of the razor.
  • Pull rear casing up and off razor.
  • Be careful not to break any plastic!

Lift up the rear casing from the bottom of the razor.

This may require you to gently pry it apart with you fingers.

Lift up the rear casing from the sides of the razor.

Pull rear casing up and off razor.

Be careful not to break any plastic!

Step 5

              Battery               
  • Using the Phillips 00 driver bit, remove six screws (12mm) from the battery case.

Using the Phillips 00 driver bit, remove six screws (12mm) from the battery case.

Step 6

  • Remove battery case.

Remove battery case.

Step 7

  • Remove old battery by lifting the battery up and left.
  • There are plastic brackets holding the battery on the right. Removing up and left ensures that the brackets will not be damaged and the battery will not come loose.

Remove old battery by lifting the battery up and left.

There are plastic brackets holding the battery on the right. Removing up and left ensures that the brackets will not be damaged and the battery will not come loose.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Andrew Trainor                     

Member since: 03/05/2017

573 Reputation

                                      5 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       UMass Dartmouth, Team S8-G3, Catania Spring 2017                        

                                                  Member of UMass Dartmouth, Team S8-G3, Catania Spring 2017 



                    UMASSD-CATANIA-S17S8G3                     


                                            3 Members                     


                                            5 Guides authored                     

WooKstah - Jun 29, 2018

Reply

Where does one actually find the replacement batteries though?