Panasonic Bread Bakery Sd 251 Belt Drive Replacement Repair Guide

Difficulty

Easy

Steps

7

Time Required

                          10 minutes            

Sections

2

• Common stage of dissasembling
• 6 steps
• Belt Drive
• 1 step

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

Grammar Police

Embrace your inner English teacher and help improve this guide’s grammar!

• BackPanasonic Bread Bakery SD-251

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Preparations for work               

• Make sure the machine is not under power and
• remove the inner container

Make sure the machine is not under power and

remove the inner container

1024

Step 2

              Removing the lid               

• Remove the screw on the left side of the hinge of the lid (whith a philips 1 screwdrive)
• After the screw is removed, you can move the lid (in open position) to the other side and slide it off the hinge (removing the lid completely)

Remove the screw on the left side of the hinge of the lid (whith a philips 1 screwdrive)

After the screw is removed, you can move the lid (in open position) to the other side and slide it off the hinge (removing the lid completely)

Step 3

              Remove the screws from the bottom part               

• Turn the complete machine upside down
• Remove the four (PH1) screws from the four rubber stands.

Turn the complete machine upside down

Remove the four (PH1) screws from the four rubber stands.

Step 4

• Remove the two normal screws from the shorter sides (normal PH1 screws)

Remove the two normal screws from the shorter sides (normal PH1 screws)

Step 5

• Remove the two torx screws from the longer sides (T20 S2)

Remove the two torx screws from the longer sides (T20 S2)

Step 6

              Reveal the inner side               

• When all screws are removed from the bottom side, the metal cover can be simply lifted up, and the motor is visible

When all screws are removed from the bottom side, the metal cover can be simply lifted up, and the motor is visible

Step 7

              Belt Drive               

• With the help of the 8 mm wrench, remove the bolt from the black plastic gear wheel
• lift the black gear wheel up and the belt drive can be replaced

With the help of the 8 mm wrench, remove the bolt from the black plastic gear wheel

lift the black gear wheel up and the belt drive can be replaced

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 1 other contributor 

                    Bango Bejla                     

Member since: 11/08/2016

1,285 Reputation

                                      5 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges