Difficulty

Moderate

Steps

14

Time Required

                          15 minutes

Sections

2

  • Common stage of dissasembling
  • 6 steps
  • Display
  • 8 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

Grammar Police

Embrace your inner English teacher and help improve this guide’s grammar!

  • BackPanasonic Bread Bakery SD-251

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Preparations for work
  • Make sure the machine is not under power and
  • remove the inner container

Make sure the machine is not under power and

remove the inner container

1024

Step 2

              Removing the lid
  • Remove the screw on the left side of the hinge of the lid (whith a philips 1 screwdrive)
  • After the screw is removed, you can move the lid (in open position) to the other side and slide it off the hinge (removing the lid completely)

Remove the screw on the left side of the hinge of the lid (whith a philips 1 screwdrive)

After the screw is removed, you can move the lid (in open position) to the other side and slide it off the hinge (removing the lid completely)

Step 3

              Remove the screws from the bottom part
  • Turn the complete machine upside down
  • Remove the four (PH1) screws from the four rubber stands.

Turn the complete machine upside down

Remove the four (PH1) screws from the four rubber stands.

Step 4

  • Remove the two normal screws from the shorter sides (normal PH1 screws)

Remove the two normal screws from the shorter sides (normal PH1 screws)

Step 5

  • Remove the two torx screws from the longer sides (T20 S2)

Remove the two torx screws from the longer sides (T20 S2)

Step 6

              Reveal the inner side
  • When all screws are removed from the bottom side, the metal cover can be simply lifted up, and the motor is visible

When all screws are removed from the bottom side, the metal cover can be simply lifted up, and the motor is visible

Step 7

              Remove the screws from the upper side
  • Turn the device back upwards
  • Remove the six (PH1) screws around the grey part (beneath the removed lid)

Turn the device back upwards

Remove the six (PH1) screws around the grey part (beneath the removed lid)

Step 8

  • Remove the two (PH1) screws from the display panels side
  • one on the right side of the baker
  • one on the back of the backer

Remove the two (PH1) screws from the display panels side

one on the right side of the baker

one on the back of the backer

Step 9

              Loosening the Chassis from the inner part to release hooks
  • Try moving the metal chassis downward, holding the grey inner part, creating a tiny gap on the left side of the machine and loosening the inner part a bit
  • the right side loosens up a bit too

Try moving the metal chassis downward, holding the grey inner part, creating a tiny gap on the left side of the machine and loosening the inner part a bit

the right side loosens up a bit too

Step 10

  • Push the metal chassis inwards, so that the plastic hook is moved out of the metal chassis
  • This may be the hardest part

Push the metal chassis inwards, so that the plastic hook is moved out of the metal chassis

This may be the hardest part

Step 11

              Opening up the display side
  • After the front hook is moved out, the plastic display part can be turned to the right along the shorter side
  • Turn gently, because there is a cable connecting the display with the lower (inner) part
  • There is a hook on the right side too, which is unhooked durint the turning

After the front hook is moved out, the plastic display part can be turned to the right along the shorter side

Turn gently, because there is a cable connecting the display with the lower (inner) part

There is a hook on the right side too, which is unhooked durint the turning

Step 12

              Removing the core display
  • Remove the (PH1) screw from the bottom part (upper side after turning out) of the display

Remove the (PH1) screw from the bottom part (upper side after turning out) of the display

Step 13

  • Tilt the display brick and move it towards yourself to release the hooks on the upper side of the brick

Tilt the display brick and move it towards yourself to release the hooks on the upper side of the brick

Step 14

              Display circuit revealed
  • Finally, the inner display and buttons can be reached and cleaned

Finally, the inner display and buttons can be reached and cleaned

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    Bango Bejla

Member since: 11/08/2016

1,285 Reputation

                                      5 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges