Difficulty
Easy
Steps
5
Time Required
1 - 3 minutes
Sections
1
- Battery Door
- 5 steps
Flags
0
BackPanasonic Lumix DMC-FX37
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery Door
- Set the switch on the battery door to “open,” and open the door.
Set the switch on the battery door to “open,” and open the door.
1024
Step 2
- At the left hand side, locate the head of the metal bar that holds the spring in place.
At the left hand side, locate the head of the metal bar that holds the spring in place.
Step 3
- Push the metal bar down using the metal tweezers.
Push the metal bar down using the metal tweezers.
Step 4
- Pull the metal bar that holds the spring in place out.
- You can also use tweezers for this step, although we found it easier to just use our fingers.
Pull the metal bar that holds the spring in place out.
You can also use tweezers for this step, although we found it easier to just use our fingers.
Step 5
- Remove the battery access door from the device.
- In order to keep the “springiness” of the door, be sure that the long arm of the spring is not over the hole for the battery.
Remove the battery access door from the device.
In order to keep the “springiness” of the door, be sure that the long arm of the spring is not over the hole for the battery.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Zhentao
Member since: 01/30/2018
247 Reputation
2 Guides authored
Badges:
5
+2 more badges
Team
Baylor, Team S2-G3, Johnson Spring 2018
Member of Baylor, Team S2-G3, Johnson Spring 2018
BU-JOHNSON-S18S2G3
3 Members
6 Guides authored