Difficulty

Easy

Steps

10

Time Required

                          10 minutes

Sections

3

  • Disk Tray Cover
  • 3 steps
  • Exterior Cover
  • 4 steps
  • Disk Drive
  • 3 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackPanasonic DMP-BD89

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Disk Tray Cover
  • First, before powering off, press the eject button to open the tray.

First, before powering off, press the eject button to open the tray.

1024

Step 2

  • Remove the front cover of the tray.
  • Do so by gently pushing it out, away from the player, ensuring the pictured tabs clear the tray.
  • Then slide it vertically up and away.

Remove the front cover of the tray.

Do so by gently pushing it out, away from the player, ensuring the pictured tabs clear the tray.

Then slide it vertically up and away.

Step 3

  • Press eject button to close the tray.
  • Make sure to unpower and unplug device before continue work on other fixes.

Press eject button to close the tray.

Make sure to unpower and unplug device before continue work on other fixes.

Step 4

              Exterior Cover
  • Using a Phillips #1 screwdriver, unscrew the back three screws.

Using a Phillips #1 screwdriver, unscrew the back three screws.

Step 5

  • Slide the top panel horizontally to remove it.

Slide the top panel horizontally to remove it.

Step 6

  • Locate 6 tabs across the device.
  • 2 are on the bottom, 1 is on the left and right, and 2 are are on the inside.

Locate 6 tabs across the device.

2 are on the bottom, 1 is on the left and right, and 2 are are on the inside.

Step 7

  • Pop the 6 markers out.
  • Then take off the cover.

Pop the 6 markers out.

Then take off the cover.

Step 8

              Disk Drive
  • Remove screws surrounding disk drive that attach it to outer cover.

Remove screws surrounding disk drive that attach it to outer cover.

Step 9

  • Remove the one green andthree blue tabs pictured that connect the disk drive to the board. Try to do so carefully, to avoid damage to the hardware.

Remove the one green andthree blue tabs pictured that connect the disk drive to the board. Try to do so carefully, to avoid damage to the hardware.

Step 10

  • Carefully take the drive out of the device. Note where the feet need to go back in for reassembly.

Carefully take the drive out of the device. Note where the feet need to go back in for reassembly.

To reassemble your device, follow these instructions in reverse order. Ensure the feet of the disk drive go back in the holes.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Julian

Member since: 10/17/2017

107 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       UC Santa Barbara, Team S2-G9, Weedon Fall 2017                        

                                                  Member of UC Santa Barbara, Team S2-G9, Weedon Fall 2017 



                    UCSB-WEEDON-F17S2G9                     


                                            4 Members                     


                                            4 Guides authored