Difficulty
Moderate
Steps
8
Time Required
15 minutes
Sections
1
- Motor
- 8 steps
Flags
0
BackPanasonic ER-GN30-K
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Motor
- Remove the dark transparent cap by gently pulling on it.
Remove the dark transparent cap by gently pulling on it.
1024
Step 2
- Remove the back battery cap from the device by twisting it to the unlock position and pulling.
Remove the back battery cap from the device by twisting it to the unlock position and pulling.
Step 3
- Remove the black trimmer cap from the top of the device by gently pulling it.
Remove the black trimmer cap from the top of the device by gently pulling it.
Step 4
- Use a metal spudger to pry apart the silver plastic case.
- Pull each side of the plastic case off.
Use a metal spudger to pry apart the silver plastic case.
Pull each side of the plastic case off.
Step 5
- Unscrew one 20mm Phillips #00 screw.
Unscrew one 20mm Phillips #00 screw.
Step 6
- Remove the rubber stopper from the top of the motor shaft by gently pulling it off.
Remove the rubber stopper from the top of the motor shaft by gently pulling it off.
Step 7
- Use a pair of tweezers to remove the plastic cover of the motor shaft by pulling it away from the motor.
Use a pair of tweezers to remove the plastic cover of the motor shaft by pulling it away from the motor.
Step 8
- Remove the motor from the case by sliding the cover off of it.
Remove the motor from the case by sliding the cover off of it.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Author
with 3 other contributors
Corey Tappan
Member since: 08/27/2015
173 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
USF Tampa, Team 15-3, Blackwell Fall 2015
Member of USF Tampa, Team 15-3, Blackwell Fall 2015
USFT-BLACKWELL-F15S15G3
4 Members
5 Guides authored
