Difficulty

Moderate

Steps

7

Time Required

                          10 minutes

Sections

1

  • Motor Shaft
  • 7 steps

Flags

0

  • BackPanasonic ER-GN30-K

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Motor Shaft
  • Remove the dark transparent cap by gently pulling on it.

Remove the dark transparent cap by gently pulling on it.

1024

Step 2

  • Remove the back battery cap from the device by twisting it to the unlock position and pulling.

Remove the back battery cap from the device by twisting it to the unlock position and pulling.

Step 3

  • Remove the black trimmer cap from the top of the device by gently pulling it.

Remove the black trimmer cap from the top of the device by gently pulling it.

Step 4

  • The motor shaft should be sticking out from the top of the device.
  • Use the metal prying tool to pry apart the silver plastic case .
  • Pull each side of the plastic case off.

The motor shaft should be sticking out from the top of the device.

Use the metal prying tool to pry apart the silver plastic case .

Pull each side of the plastic case off.

Step 5

  • Unscrew one 20mm Phillips #00 screw.

Unscrew one 20mm Phillips #00 screw.

Step 6

  • Remove the rubber stopper from the top of the motor shaft by gently pulling it off.

Remove the rubber stopper from the top of the motor shaft by gently pulling it off.

Step 7

  • Use a pair of tweezers to remove the plastic cover of the motor shaft by pulling it away from the motor.

Use a pair of tweezers to remove the plastic cover of the motor shaft by pulling it away from the motor.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    Alejandro Garabatos

Member since: 09/03/2015

324 Reputation

                                      2 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       USF Tampa, Team 15-3, Blackwell Fall 2015                        

                                                  Member of USF Tampa, Team 15-3, Blackwell Fall 2015 



                    USFT-BLACKWELL-F15S15G3                     


                                            4 Members                     


                                            5 Guides authored

Aurimas Miko - Dec 8, 2021

Reply

Thank you, small parts where switch is could be shown as well. Would be very helpful.

Advise for putting things back together: remove plastic switch cover and put back only after full reassembly

fazebence - Mar 25, 2022

Reply

Dear Alejandro,

thank You for your instruction, my question is where this motor shaft part is available? I can’t find it anywhere on the net. Thanks if you can help. Bence Fazekas