Difficulty

Easy

Steps

11

Time Required

                          10 minutes

Sections

2

  • Battery
  • 8 steps
  • Motor
  • 3 steps

Flags

0

  • BackPanasonic ES2207P

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Remove foil head and blades.

Remove foil head and blades.

1024

Step 2

  • Remove (2) 7.9mm Phillips #0 screws.
  • Remove (2) 14.3mm Phillips #0 screws.

Remove (2) 7.9mm Phillips #0 screws.

Remove (2) 14.3mm Phillips #0 screws.

Step 3

  • Push the blade mount assembly towards the rear of razor and remove.

Push the blade mount assembly towards the rear of razor and remove.

Step 4

  • Be careful not to break any tabs that hold the panels to the body.
  • Remove both external panels using spudger if necessary.

Be careful not to break any tabs that hold the panels to the body.

Remove both external panels using spudger if necessary.

Step 5

  • Remove (2) 7.9mm Phillips #0 screws.

Step 6

  • This step may require a fair amount of force due to the O-ring.
  • Pull to separate the end-cap from the body.

This step may require a fair amount of force due to the O-ring.

Pull to separate the end-cap from the body.

Step 7

  • Remove (2) 7.9mm Phillips #0 screws and remove endcap from frame.

Remove (2) 7.9mm Phillips #0 screws and remove endcap from frame.

Step 8

  • Push forward on the lower terminal to remove the battery from the frame.

Push forward on the lower terminal to remove the battery from the frame.

Step 9

              Motor
  • Remove battery contact.

Remove battery contact.

Step 10

  • Using pointed end of spudger, push on the motor through the hole in the back

Using pointed end of spudger, push on the motor through the hole in the back

Step 11

  • Use your fingers to finish removing motor from frame.

Use your fingers to finish removing motor from frame.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Kevin Marvell

Member since: 11/06/2017

309 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       IUPUI, Team S6-G5, Baechle Fall 2017                        

                                                  Member of IUPUI, Team S6-G5, Baechle Fall 2017 



                    IUPUI-BAECHLE-F17S6G5                     


                                            3 Members                     


                                            2 Guides authored