Difficulty

Moderate

Steps

7

Time Required

                          5 - 10 minutes

Sections

2

  • Side Cover
  • 2 steps
  • Shoe Adapter
  • 5 steps

Flags

0

  • BackPanasonic HC‑VX870

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Side Cover
  • Unscrew the J1 screws on the left side of the camcorder.
  • Unscrew the marked screws on the bottom of the camcorder.
  • Unscrew the marked screws on the back of the camcorder.

Unscrew the J1 screws on the left side of the camcorder.

Unscrew the marked screws on the bottom of the camcorder.

Unscrew the marked screws on the back of the camcorder.

1024

Step 2

  • Pull off the left side of the camcorder. You may have to use a little force but don’t worry about breaking anything in the camcorder.

Pull off the left side of the camcorder. You may have to use a little force but don’t worry about breaking anything in the camcorder.

Step 3

              Shoe Adapter
  • Unscrew the indicated screw on the right side of the camcorder.
  • Unscrew the indicated screw on the back of the camcorder.

Unscrew the indicated screw on the right side of the camcorder.

Unscrew the indicated screw on the back of the camcorder.

Step 4

  • Unscrew indicated screw on the inside of the left side of the camcorder.

Unscrew indicated screw on the inside of the left side of the camcorder.

Step 5

  • Remove the top cover of the camcorder by lightly lifting up on the back end of the top and tugging away from the lens (don’t be afraid to use force).

Remove the top cover of the camcorder by lightly lifting up on the back end of the top and tugging away from the lens (don’t be afraid to use force).

Step 6

  • Unscrew the indicated screws and remove the piece they hold in place.
  • Unscrew the indicated screws and remove the piece they hold in place.

Unscrew the indicated screws and remove the piece they hold in place.

Step 7

  • Remove the shoe adapter by simply pulling it out of its place.
  • Be sure not to loose the tiny spring that is attached to the shoe adapter as you are removing it.

Remove the shoe adapter by simply pulling it out of its place.

Be sure not to loose the tiny spring that is attached to the shoe adapter as you are removing it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Rebecca Maloney

Member since: 01/24/2017

501 Reputation

                                      5 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       Cal Poly, Team 13-6, Banghart Winter 2017                        

                                                  Member of Cal Poly, Team 13-6, Banghart Winter 2017 



                    CPSU-BANGHART-W17S13G6                     


                                            4 Members                     


                                            10 Guides authored