Difficulty

Moderate

Steps

9

Time Required

                          7 - 10 minutes

Sections

1

  • Case
  • 9 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackPanasonic KX-E603

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Case
  • Flip the typewriter to expose the bottom body panel.
  • Be careful to not damage the top surface of the typewriter when you rest it upside-down.

Flip the typewriter to expose the bottom body panel.

Be careful to not damage the top surface of the typewriter when you rest it upside-down.

1024

Step 2

  • Remove the three 19 mm screws located in the recessed holes on the edge of the black underside panel using a Phillips #2 screwdriver.

Remove the three 19 mm screws located in the recessed holes on the edge of the black underside panel using a Phillips #2 screwdriver.

Step 3

  • Flip the typewriter back to its original orientation, then rotate it so that the rear is facing towards you.
  • Remove the three 19 mm screws near the bottom of the tan body panel using a Phillips #2 screwdriver.

Flip the typewriter back to its original orientation, then rotate it so that the rear is facing towards you.

Remove the three 19 mm screws near the bottom of the tan body panel using a Phillips #2 screwdriver.

Step 4

  • Open the typewriter lid and push the carriage away to expose the two screws holding the case to the chassis.
  • Remove the two 19 mm screws using a Phillips #2 screwdriver.

Open the typewriter lid and push the carriage away to expose the two screws holding the case to the chassis.

Remove the two 19 mm screws using a Phillips #2 screwdriver.

Step 5

  • Flip the plastic lever on the right side of the roller wheel to disengage the paper lock.

Flip the plastic lever on the right side of the roller wheel to disengage the paper lock.

Step 6

  • Remove the roller wheel adjustment knobs by pulling firmly outward.
  • Both black knobs must be removed in this step.

Remove the roller wheel adjustment knobs by pulling firmly outward.

Both black knobs must be removed in this step.

Step 7

  • Unlock the roller wheel by simultaneously pressing down on the two spring levers on the left and right of the roller ends.

Unlock the roller wheel by simultaneously pressing down on the two spring levers on the left and right of the roller ends.

Step 8

  • While both spring levers are depressed, lift up with both hands to remove the roller wheel.

While both spring levers are depressed, lift up with both hands to remove the roller wheel.

Step 9

  • Flip the top down. Then, with both hands, lift straight up on the tan case to remove it from the chassis.

Flip the top down. Then, with both hands, lift straight up on the tan case to remove it from the chassis.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 5 other contributors 


                    Matthew Callaghan

Member since: 04/08/2015

265 Reputation

                                      1 Guide authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       Cal Poly, Team 17-1, Forte Spring 2015                        

                                                  Member of Cal Poly, Team 17-1, Forte Spring 2015 



                    CPSU-FORTE-S15S17G1                     


                                            4 Members                     


                                            6 Guides authored