Difficulty
Moderate
Steps
6
Time Required
10 - 15 minutes
Sections
3
- Battery
- 2 steps
- Replace Phone Face
- 3 steps
- Button Pad
- 1 step
Flags
0
BackPanasonic KX-TG6021M
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Slide the back cover down towards the bottom of the phone to remove.
Slide the back cover down towards the bottom of the phone to remove.
1024
Step 2
- Pull the top of the battery towards you to remove it from the phone.
Pull the top of the battery towards you to remove it from the phone.
Step 3
Replace Phone Face
- Unscrew the two screws located at the bottom of the phone.
- Use a PH00 Phillips head to remove the 9 mm screws.
Unscrew the two screws located at the bottom of the phone.
Use a PH00 Phillips head to remove the 9 mm screws.
Step 4
- Separate the back cover from the front cover by using a wedge.
- Remove the back cover from the front cover by pulling them apart.
Separate the back cover from the front cover by using a wedge.
Remove the back cover from the front cover by pulling them apart.
Step 5
- Remove three screws on the motherboard.
- Pull the phone face off of the motherboard.
Remove three screws on the motherboard.
Pull the phone face off of the motherboard.
Step 6
Button Pad
- Remove the button pad.
Remove the button pad.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Leah Meador
Member since: 10/24/2016
289 Reputation
2 Guides authored
Badges:
9
+6 more badges
Team
IUPUI, Team 3-1, Baechle Fall 2016
Member of IUPUI, Team 3-1, Baechle Fall 2016
IUPUI-BAECHLE-F16S3G1
4 Members
11 Guides authored
