Panasonic Kx Tg6021M Front Speaker Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

Suggest a time??

Sections

3

• Battery
• 2 steps
• Replace Phone Face
• 3 steps
• Front Speaker
• 3 steps

Flags

2

Missing Prerequisites

This guide is missing information on how to start the process. Make a prerequisite guide!

Missed a Step

Oops! This guide is currently missing some important steps.

• BackPanasonic KX-TG6021M

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Slide the back cover down towards the bottom of the phone to remove.

Slide the back cover down towards the bottom of the phone to remove.

1024

Step 2

• Pull the top of the battery towards you to remove it from the phone.

Pull the top of the battery towards you to remove it from the phone.

Step 3

              Replace Phone Face               

• Unscrew the two screws located at the bottom of the phone.
• Use a PH00 Phillips head to remove the 9 mm screws.

Unscrew the two screws located at the bottom of the phone.

Use a PH00 Phillips head to remove the 9 mm screws.

Step 4

• Separate the back cover from the front cover by using a wedge.
• Remove the back cover from the front cover by pulling them apart.

Separate the back cover from the front cover by using a wedge.

Remove the back cover from the front cover by pulling them apart.

Step 5

• Remove three screws on the motherboard.
• Pull the phone face off of the motherboard.

Remove three screws on the motherboard.

Pull the phone face off of the motherboard.

Step 6

              Front Speaker               

• Remove the front speaker housing by detaching it from the circuit board.

Remove the front speaker housing by detaching it from the circuit board.

Step 7

• Pop out the front speaker from the housing.

Pop out the front speaker from the housing.

Step 8

• Desolder the two connections and remove the wires from the circuit board.

Desolder the two connections and remove the wires from the circuit board.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    paul scruggs                     

Member since: 10/24/2016

177 Reputation

                                      1 Guide authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       IUPUI, Team 3-1, Baechle Fall 2016                        

                                                  Member of IUPUI, Team 3-1, Baechle Fall 2016 



                    IUPUI-BAECHLE-F16S3G1                     


                                            4 Members                     


                                            11 Guides authored