Difficulty

Easy

Steps

8

Time Required

                          20 minutes

Sections

2

  • Battery
  • 2 steps
  • Keypad
  • 6 steps

Flags

0

  • BackPanasonic KX-TGA600M

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • On the back of the phone, remove battery cover.
  • Push down on the marked indentation and pull downwards.

On the back of the phone, remove battery cover.

Push down on the marked indentation and pull downwards.

1024

Step 2

  • Pull out to remove the battery.

Pull out to remove the battery.

Step 3

              Keypad
  • Once battery is removed, use the Phillips #00 screwdriver to remove the two silver screws at the bottom left and right corners on the back of the phone.

Once battery is removed, use the Phillips #00 screwdriver to remove the two silver screws at the bottom left and right corners on the back of the phone.

Step 4

  • Pull the phone apart. The plastic opening tool may be needed.
  • The clear light piece will fall out, so make sure you place it next to the screws.

Pull the phone apart. The plastic opening tool may be needed.

The clear light piece will fall out, so make sure you place it next to the screws.

Step 5

  • Use the Phillips #00 screwdriver to remove the three screws holding the circuit-board in place.
  • The screws are located in the top right corner, bottom left corner, and bottom right corner.

Use the Phillips #00 screwdriver to remove the three screws holding the circuit-board in place.

The screws are located in the top right corner, bottom left corner, and bottom right corner.

Step 6

  • Once the screws are out, remove the charging contacts beneath the two bottom corner screws.

Once the screws are out, remove the charging contacts beneath the two bottom corner screws.

Step 7

  • Remove the circuit board.

Remove the circuit board.

Step 8

  • Pull back the black silicone keypad.

Pull back the black silicone keypad.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors 


                    Lauren Bowman

Member since: 01/31/2017

158 Reputation

                                      1 Guide authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       University of North Texas, Team 1-4, Campbell Spring 2017                        

                                                  Member of University of North Texas, Team 1-4, Campbell Spring 2017 



                    UNT-CAMPBELL-S17S1G4                     


                                            4 Members                     


                                            6 Guides authored