Difficulty
Moderate
Steps
5
Time Required
25 - 30 minutes
Sections
2
- Battery
- 2 steps
- Speaker
- 3 steps
Flags
0
BackPanasonic KX-TGA600M
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- On the back of the phone, remove battery cover.
- Push down on the marked indentation and pull downwards.
On the back of the phone, remove battery cover.
Push down on the marked indentation and pull downwards.
1024
Step 2
- Pull out to remove the battery.
Pull out to remove the battery.
Step 3
Speaker
- Unscrew the two screws on the bottom left and right.
Unscrew the two screws on the bottom left and right.
Step 4
- Separate the front and back of the phone.
- Store loose pieces for later replacement.
Separate the front and back of the phone.
Store loose pieces for later replacement.
Step 5
- Remove the speaker housing.
- During reassembly, solder the wires onto the speaker housing. For information on soldering, please refer to iFixit’s soldering technique guide.
Remove the speaker housing.
During reassembly, solder the wires onto the speaker housing. For information on soldering, please refer to iFixit’s soldering technique guide.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Kaleb Barquera
Member since: 01/31/2017
101 Reputation
1 Guide authored
Badges:
2
Team
University of North Texas, Team 1-4, Campbell Spring 2017
Member of University of North Texas, Team 1-4, Campbell Spring 2017
UNT-CAMPBELL-S17S1G4
4 Members
6 Guides authored