Difficulty
Moderate
Steps
5
Time Required
5 - 15 minutes
Sections
1
- Base Front Panel Assembly
- 5 steps
Flags
0
BackPanasonic KX-TGE233
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Base Front Panel Assembly
- To fix this component, we’ll need to work with the main docking station. This is the one with the answering machine and the TEL line.
To fix this component, we’ll need to work with the main docking station. This is the one with the answering machine and the TEL line.
1024
Step 2
- To start, we’ll need to work with objects on the bottom of the device, so begin by flipping the device over.
To start, we’ll need to work with objects on the bottom of the device, so begin by flipping the device over.
Step 3
- To open the main docking station, you’ll need to remove four 11 mm Philips #0 screws.
To open the main docking station, you’ll need to remove four 11 mm Philips #0 screws.
Step 4
- With the screws removed, you can use a spudger to aid in removing the back from the device.
- Levering the back by the spudger may break the tool!
With the screws removed, you can use a spudger to aid in removing the back from the device.
Levering the back by the spudger may break the tool!
Step 5
- With the back removed, we now have direct access to all other components in the main docking station.
With the back removed, we now have direct access to all other components in the main docking station.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Jesse Satterwhite
Member since: 02/11/2016
643 Reputation
5 Guides authored
Badges:
17
+14 more badges
Team
IUPUI, Team 2-2, Baechle Spring 2016
Member of IUPUI, Team 2-2, Baechle Spring 2016
IUPUI-BAECHLE-S16S2G2
5 Members
14 Guides authored