Difficulty

Moderate

Steps

7

Time Required

                          5 - 15 minutes

Sections

2

  • Battery
  • 2 steps
  • Handset Front Panel Assembly
  • 5 steps

Flags

0

  • BackPanasonic KX-TGE233

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Flip the handset over to expose the back panel, and slide the panel out to remove.

Flip the handset over to expose the back panel, and slide the panel out to remove.

1024

Step 2

  • Carefully remove the two batteries by lifting up from one end.

Carefully remove the two batteries by lifting up from one end.

Step 3

              Handset Front Panel Assembly
  • Remove the two screws behind the battery panel by using a Philips size #00 screwdriver.

Remove the two screws behind the battery panel by using a Philips size #00 screwdriver.

Step 4

  • Using a spudger, open the device by starting from the bottom and working your way to the top.
  • This will require some force, so be careful not to break any of the wires inside of the device.

Using a spudger, open the device by starting from the bottom and working your way to the top.

This will require some force, so be careful not to break any of the wires inside of the device.

Step 5

  • Once the back has been separated from the rest of the device, carefully place it to the side. Be careful not to completely remove it, however, as there are wires connecting the back to the handset.

Once the back has been separated from the rest of the device, carefully place it to the side. Be careful not to completely remove it, however, as there are wires connecting the back to the handset.

Step 6

  • Using the same screwdriver as before, remove the Philips size #00 screw holding the motherboard in place.

Using the same screwdriver as before, remove the Philips size #00 screw holding the motherboard in place.

Step 7

  • With the screw removed, the front panel assembly can be separated from the rest of the device.

With the screw removed, the front panel assembly can be separated from the rest of the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Jesse Satterwhite

Member since: 02/11/2016

643 Reputation

                                      5 Guides authored                  



                       Badges:
                       17







                                                        +14 more badges

Team

                       IUPUI, Team 2-2, Baechle Spring 2016                        

                                                  Member of IUPUI, Team 2-2, Baechle Spring 2016 



                    IUPUI-BAECHLE-S16S2G2                     


                                            5 Members                     


                                            14 Guides authored