Difficulty
Moderate
Steps
3
Time Required
5 minutes
Sections
1
- Circuit Board
- 3 steps
Flags
0
BackPanasonic Lumix DMC-FH20
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Circuit Board
- Remove all screws (Phillips #000 head) from the sides and bottom of the camera.
Remove all screws (Phillips #000 head) from the sides and bottom of the camera.
1024
Step 2
- Remove the back panel. This might require some extra force. If you still can’t get the panel off, try to use a plastic opening tool.
Remove the back panel. This might require some extra force. If you still can’t get the panel off, try to use a plastic opening tool.
Step 3
- Remove the circuit board. You should be able to do this with your fingers. Just grab it and pull upwards. If it does not come, use a plastic opening tool to help.
Remove the circuit board. You should be able to do this with your fingers. Just grab it and pull upwards. If it does not come, use a plastic opening tool to help.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Arianna Boushell
Member since: 01/24/2017
626 Reputation
5 Guides authored
Badges:
13
+10 more badges
Team
Cal Poly, Team 10-7, Banghart Winter 2017
Member of Cal Poly, Team 10-7, Banghart Winter 2017
CPSU-BANGHART-W17S10G7
3 Members
10 Guides authored
