Panasonic Lumix Dmc Fh20 Lcd Screen Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          5 - 10 minutes            

Sections

1

• LCD Screen
• 6 steps

Flags

0

• BackPanasonic Lumix DMC-FH20

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              LCD Screen               

• Remove all screws (Phillips #000 head) from the sides and bottom of the camera.

Remove all screws (Phillips #000 head) from the sides and bottom of the camera.

1024

Step 2

• Remove the back panel. This might require some extra force. If you still can’t get the panel off, try to use a plastic opening tool.

Remove the back panel. This might require some extra force. If you still can’t get the panel off, try to use a plastic opening tool.

Step 3

• Remove the circuit board. You should be able to do this with your fingers. Just grab it and pull upwards. If it does not come, use a plastic opening tool to help.

Remove the circuit board. You should be able to do this with your fingers. Just grab it and pull upwards. If it does not come, use a plastic opening tool to help.

Step 4

• Remove the white plastic cover. This may take some extra force. You will want to try to remove from the bottom side first and peel up.
• Then, where the silver switch is located, it will slide directly out at the top.

Remove the white plastic cover. This may take some extra force. You will want to try to remove from the bottom side first and peel up.

Then, where the silver switch is located, it will slide directly out at the top.

Step 5

• Unscrew one screw (Phillips #000 head).

Unscrew one screw (Phillips #000 head).

Step 6

• You will want to use a plastic opening tool to complete this step. Pop the thin black piece of plastic upwards with the opening tool to unlock the plastic film ribbon.
• Once unlocked, you will be able to pull the ribbon out and remove the screen completely.

You will want to use a plastic opening tool to complete this step. Pop the thin black piece of plastic upwards with the opening tool to unlock the plastic film ribbon.

Once unlocked, you will be able to pull the ribbon out and remove the screen completely.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 1 other contributor 

                    Arianna Boushell                     

Member since: 01/24/2017

626 Reputation

                                      5 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges                           

Team

                       Cal Poly, Team 10-7, Banghart Winter 2017                        

                                                  Member of Cal Poly, Team 10-7, Banghart Winter 2017 



                    CPSU-BANGHART-W17S10G7                     


                                            3 Members                     


                                            10 Guides authored