Difficulty
Easy
Steps
3
Time Required
3 minutes
Sections
1
- Front Case
- 3 steps
Flags
0
BackPanasonic Lumix DMC-FH25
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Front Case
- Remove four screws on the front case using a 00 Phillips head screwdriver. Two will be on the side with the camera strap, one on the bottom, and one on the side opposing the camera strap. They will be in pairs, one screw holding the front case and one screw holding the back case.
Remove four screws on the front case using a 00 Phillips head screwdriver. Two will be on the side with the camera strap, one on the bottom, and one on the side opposing the camera strap. They will be in pairs, one screw holding the front case and one screw holding the back case.
1024
Step 2
- Using a plastic opening tool and your hands, pull the front case loose from the camera.
Using a plastic opening tool and your hands, pull the front case loose from the camera.
Step 3
- Remove the front case from the camera.
Remove the front case from the camera.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Janice Weldon
Member since: 03/07/2017
591 Reputation
5 Guides authored
Badges:
8
+5 more badges
Team
UMass Dartmouth, Team S6-G6, Isaacson Spring 2017
Member of UMass Dartmouth, Team S6-G6, Isaacson Spring 2017
UMASSD-ISAACSON-S17S6G6
3 Members
10 Guides authored
