Panasonic Lumix Dmc Fh25 Lcd Screen Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

Suggest a time??

Sections

2

• Back Case
• 3 steps
• LCD Screen
• 3 steps

Flags

0

• BackPanasonic Lumix DMC-FH25

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Case               

• Remove 5 screws attached to the back case using a 00 Phillips head screwdriver.

Remove 5 screws attached to the back case using a 00 Phillips head screwdriver.

1024

Step 2

• Using your hands and a pry tool, lever the back case off.

Using your hands and a pry tool, lever the back case off.

Step 3

• Remove the back case.

Remove the back case.

Step 4

              LCD Screen               

• Using a 00 Phillips head screwdriver, remove a screw from the top right corner of the screen.
• Lift the screen, being careful not to tear the ribbon cables on the right side.

Using a 00 Phillips head screwdriver, remove a screw from the top right corner of the screen.

Lift the screen, being careful not to tear the ribbon cables on the right side.

Step 5

• Access the ribbon cables by removing the green button receiver panel using a plastic opening tool. There is a white panel beneath. Carefully remove this using a plastic opening tool. The white panel may require some elbow grease to get it off, and the panel may make a snapping sound as it comes off.

Access the ribbon cables by removing the green button receiver panel using a plastic opening tool. There is a white panel beneath. Carefully remove this using a plastic opening tool. The white panel may require some elbow grease to get it off, and the panel may make a snapping sound as it comes off.

Step 6

• One of the ribbon cables will be housed behind the screen and the other will be under the panels. Gently pull each free from the housing and remove the screen.

One of the ribbon cables will be housed behind the screen and the other will be under the panels. Gently pull each free from the housing and remove the screen.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Janice Weldon                     

Member since: 03/07/2017

591 Reputation

                                      5 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       UMass Dartmouth, Team S6-G6, Isaacson Spring 2017                        

                                                  Member of UMass Dartmouth, Team S6-G6, Isaacson Spring 2017 



                    UMASSD-ISAACSON-S17S6G6                     


                                            3 Members                     


                                            10 Guides authored                     

Serge Jobin - Aug 25, 2017

Reply

it has been quite easy tank you for sharing your help serge jobin