Panasonic Lumix Dmc Fx01 Rear Casing Replacement Repair Guide

Difficulty

Moderate

Steps

9

Time Required

                          15 - 30 minutes            

Sections

2

• Battery
• 3 steps
• Rear Casing
• 6 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

• BackPanasonic Lumix DMC-FX01

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Locate the memory card and battery card latch on the bottom of the camera.
• Slide the latch to the open position.

Locate the memory card and battery card latch on the bottom of the camera.

Slide the latch to the open position.

1024

Step 2

• Open the battery latch, and slide the battery release lever to the right.

Open the battery latch, and slide the battery release lever to the right.

Step 3

• Remove the battery from the camera.

Remove the battery from the camera.

Step 4

              Rear Casing               

• Remove the three 4.6 mm screws on the bottom of the camera using a Phillips #00 screwdriver.

Remove the three 4.6 mm screws on the bottom of the camera using a Phillips #00 screwdriver.

Step 5

• Remove the single 3.2 mm screw on the left side of the camera using a Phillips #00 screwdriver.

Remove the single 3.2 mm screw on the left side of the camera using a Phillips #00 screwdriver.

Step 6

• Remove the left side casing.

Remove the left side casing.

Step 7

• Remove the two 3.2 mm screws on the right side of the camera using a Phillips #00 screwdriver.

Remove the two 3.2 mm screws on the right side of the camera using a Phillips #00 screwdriver.

Step 8

• Remove the bottom right panel.

Remove the bottom right panel.

Step 9

• Gently remove the back casing.
• Start at the bottom and carefully pry towards the top to get this piece free.

Gently remove the back casing.

Start at the bottom and carefully pry towards the top to get this piece free.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 5 other contributors 

                    Andrew                     

Member since: 10/11/2010

396 Reputation

                                      4 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       Cal Poly, Team 9-22, Regan Fall 2010                        

                                                  Member of Cal Poly, Team 9-22, Regan Fall 2010 



                    CPSU-REGAN-F10S9G22                     


                                            4 Members                     


                                            8 Guides authored