Panasonic Lumix Dmc Fx9 Selector Buttons Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

Suggest a time??

Sections

1

• Selector Buttons
• 6 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

• BackPanasonic Lumix DMC-FX9

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Selector Buttons               

• Make sure the power is off by switching the power switch to the left.

Make sure the power is off by switching the power switch to the left.

1024

Step 2

• Use a Phillips #00 screwdriver to remove the screws on the left side of the camera.

Use a Phillips #00 screwdriver to remove the screws on the left side of the camera.

Step 3

• Remove the screws on the right side of the camera by using the Philips #00 screwdriver.

Remove the screws on the right side of the camera by using the Philips #00 screwdriver.

Step 4

• Remove the screws on the bottom side of the camera using the Philips #00 Screwdriver.
• Separate the covers by gently applying force upwards, carefully placing the opening tool between the two covers.

Remove the screws on the bottom side of the camera using the Philips #00 Screwdriver.

Separate the covers by gently applying force upwards, carefully placing the opening tool between the two covers.

Step 5

• Lift the ZIF tabs up with the opening tool and carefully remove the digitizer ribbon cables.
• Remove the LCD Screen from the glass frame carefully with the opening tool.

Lift the ZIF tabs up with the opening tool and carefully remove the digitizer ribbon cables.

Remove the LCD Screen from the glass frame carefully with the opening tool.

Step 6

• Push on the back panel buttons on the front side to remove the buttons.
• Be cautious of the adhesive holding the button panels to the cover. Apply extra force if necessary.

Push on the back panel buttons on the front side to remove the buttons.

Be cautious of the adhesive holding the button panels to the cover. Apply extra force if necessary.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Kriselle Tubongbanua                     

Member since: 02/21/2018

133 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       University of North Texas, Team S6-G1, Thomas Spring 2018                        

                                                  Member of University of North Texas, Team S6-G1, Thomas Spring 2018 



                    UNT-THOMAS-S18S6G1                     


                                            4 Members                     


                                            9 Guides authored