Difficulty
Easy
Steps
3
Time Required
6 minutes
Sections
1
- LCD
- 3 steps
Flags
0
BackPanasonic Lumix DMC-G5
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
LCD
- Use J0 screwdriver to remove the two 3.2 mm screws from the outside of the assembly.
- Use the J0 screwsdriver to remove the two 5.6 mm screws from the inside of the face near the swivel.
- Rotate the face to more easily gain access to the screws.
Use J0 screwdriver to remove the two 3.2 mm screws from the outside of the assembly.
Use the J0 screwsdriver to remove the two 5.6 mm screws from the inside of the face near the swivel.
Rotate the face to more easily gain access to the screws.
1024
Step 2
- Slide the wide plastic opening tool underneath the crack of the side of the face and separate the components.
Slide the wide plastic opening tool underneath the crack of the side of the face and separate the components.
Step 3
- Carefully remove the filament connections from the LCD backing by lifting the black lever up first on the connector, then pulling gently outward from the LCD backing with your fingers.
- Replace the filament connections into the backing of the new LCD face to complete replacement..
Carefully remove the filament connections from the LCD backing by lifting the black lever up first on the connector, then pulling gently outward from the LCD backing with your fingers.
Replace the filament connections into the backing of the new LCD face to complete replacement..
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Gabriel Gonzalez Jr
Member since: 02/14/2017
325 Reputation
3 Guides authored
Badges:
10
+7 more badges
Team
USF Tampa, Team 1-3, Kass Spring 2017
Member of USF Tampa, Team 1-3, Kass Spring 2017
USFT-KASS-S17S1G3
4 Members
6 Guides authored
