Difficulty

Moderate

Steps

7

Time Required

                          25 - 30 minutes

Sections

1

  • Display Screen
  • 7 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackPanasonic Lumix DMC-GX85

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Display Screen
  • Turn the camera so that the shutter side faces the ground and the lens faces you.

Turn the camera so that the shutter side faces the ground and the lens faces you.

1024

Step 2

  • Remove the two 2mm Phillips #0 screws on the bottom of the screen.

Remove the two 2mm Phillips #0 screws on the bottom of the screen.

Step 3

  • Swivel the screen away from the camera body so it is facing the ground.

Swivel the screen away from the camera body so it is facing the ground.

Step 4

  • Remove the two 6.0mm Phillips #0 screws on the back of the screen.

Remove the two 6.0mm Phillips #0 screws on the back of the screen.

Step 5

  • Orient the camera so the lens is facing the ground.
  • Using the gap created behind the screen at the bottom, stick the iFixit opening tool inside the gap and gently open the gap.
  • Work the tool evenly around the back of the display to evenly separate the two pieces. Once the back cover is separated enough, remove it by hand.

Orient the camera so the lens is facing the ground.

Using the gap created behind the screen at the bottom, stick the iFixit opening tool inside the gap and gently open the gap.

Work the tool evenly around the back of the display to evenly separate the two pieces. Once the back cover is separated enough, remove it by hand.

Step 6

  • Be sure to use extreme caution when handling the ribbon cable to ensure the wiring within it stays intact.
  • Place the camera so that the lens is facing the ground.
  • Using the iFixit opening tool, pry the black connector open and remove the ribbon.

Be sure to use extreme caution when handling the ribbon cable to ensure the wiring within it stays intact.

Place the camera so that the lens is facing the ground.

Using the iFixit opening tool, pry the black connector open and remove the ribbon.

Step 7

  • Gently remove the screen from the camera body.

Gently remove the screen from the camera body.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 3 other contributors 


                    Hae Bom

Member since: 09/17/2019

533 Reputation

                                      3 Guides authored                  



                       Badges:
                       10





                                                        +7 more badges

Team

                       Embry-Riddle Aeronautical University, Team S22-G2, Branham Fall 2019                        

                                                  Member of Embry-Riddle Aeronautical University, Team S22-G2, Branham Fall 2019 



                    ERAU-BRANHAM-F19S22G2                     


                                            4 Members                     


                                            7 Guides authored

jptrinkster - Sep 18, 2020

Reply

Thank you very much!

Clem - Aug 18, 2022

Reply

Hi ! Thanks for the tutorial, any idea if this would be the same repair with a DC-GX9 ? The screen size seems to match