Difficulty

Moderate

Steps

5

Time Required

Suggest a time??

Sections

2

  • LCD Display
  • 3 steps
  • Door
  • 2 steps

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackPanasonic Lumix DMC-ZS1

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Exterior Screw removal
  • Remove the battery and memory card from the unit
  • Remove 6 (0.3mm) screws from the sides of the unit
  • Remove 5 (0.3mm) screws from the bottom of the unit

Remove the battery and memory card from the unit

Remove 6 (0.3mm) screws from the sides of the unit

Remove 5 (0.3mm) screws from the bottom of the unit

1024

Step 2

  • Lift up slightly the rear cover.
  • Do not remove rear cover yet. It is still attached to the Main PCB.
  • Flip up the cable clamps using a spudger or other device. Careful not to break the clamps. Release flex cables and remove back cover.

Lift up slightly the rear cover.

Do not remove rear cover yet. It is still attached to the Main PCB.

Flip up the cable clamps using a spudger or other device. Careful not to break the clamps. Release flex cables and remove back cover.

Step 3

  • Release the 3 metal clips from the rear cover and remove the LCD

Release the 3 metal clips from the rear cover and remove the LCD

Step 4

              Door
  • Complete the following review guide: LCD removal
  • Remove the front cover
  • Use tweezers or a thin object to push door pin thru enough to grab from the other side.
  • Keep door closed during this procedure so you will not loose the spring.

Complete the following review guide: LCD removal

Remove the front cover

Use tweezers or a thin object to push door pin thru enough to grab from the other side.

Keep door closed during this procedure so you will not loose the spring.

Step 5

  • Try to keep the door closed during this procedure.
  • Pull out door pin using needle nose pliers or other tool.
  • Notice spring positioning. This will help you re-install your replacement door
  • If you are having trouble installing, try to keep the spring in place by using a small piece of tape.
  • Replacement Door

Try to keep the door closed during this procedure.

Pull out door pin using needle nose pliers or other tool.

Notice spring positioning. This will help you re-install your replacement door

If you are having trouble installing, try to keep the spring in place by using a small piece of tape.

Replacement Door

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Sales Cameraparts4you

Member since: 07/01/2016

3,042 Reputation

                                      20 Guides authored                  



                       Badges:
                       17







                                                        +14 more badges